Meraki

AjitKumar · ‎Aug 24 2018

Hi If I understand you right "Make a wish" is what you are looking for? This is available at the "Bottom Right Corner" of each page on the Dashboard. One can login to Meraki Dashboard and post a request for any new feature he/she is looking to be developed.

AjitKumar · ‎Aug 24 2018

Hi, I am not sure If I could be of great help to you. The Url you posted do not contain the complete specifications of the adapter. The nearest I could locate is https://www.balticnetworks.com/meraki-ac-adapter-for-mr-wireless-access-points-12v-2-5a-us-version.html which seems to be an US version. The specifications are close to the one on the Meraki website. I believe EU version is referring to the same model. So I assume this shall be compatible. I have always been using POE injectors and POE switches to power the APs. Hence shall recommend using them unless there is a special case. Note: I have no experience of using Power adaptors with Meraki APs.

AjitKumar · ‎Aug 24 2018

Hi Erik Are you asking about applying "Group Policy" to a client device automatically when it connects to network? If yes, I can think of few options here. For 1. Wireless Client (MR) One can apply "Group Policy" on the basis of Device Type. Check the following Url. https://documentation.meraki.com/MR/Group_Policies_and_Blacklisting/Applying_Policies_by_Device_Type For 2. Wired Client (MX) One can apply "Group Policy" on the VLAN. Check the following Url. https://documentation.meraki.com/MR/Group_Policies_and_Blacklisting/Creating_and_Applying_Group_Policies#By_VLAN Also I believe one can apply Group Policies on the basis of "Active Directory Group" , "RADIUS Attribute", "Systems Manager Sentry" and "SSID". Hope this help you?

AjitKumar · ‎Aug 23 2018

Hi Jrivano, I do not see a challenge here, we are using 1G SFP's in SFP+ slots for few of our customers.

AjitKumar · ‎Aug 21 2018

Hi Matt I could not see that either on the Local status page / dashboard. I quick idea was to take a packet capture on Internet Port 2. There I got the MAC Address of the Source Interface. Hope this helps.

AjitKumar · ‎Aug 21 2018

I remember seeing this always. I guess.

AjitKumar · ‎Aug 21 2018

*** Happy Birthday Meraki Community*** I am so so so happy to be part of this celebration!!!

AjitKumar · ‎Aug 20 2018

Hi, I am not sure if this is a networking issue. One idea is to "Whitelist" the printer and try to printing. (Network-wide->Clients->[Select the printer]->Click on "Policy" Drop Down->Select Whitelisted)

AjitKumar · ‎Aug 17 2018

Hi I hope you are referring to following features. 1) Flow preferences Security appliance->Traffic Shaping 2) NAT & Port Forwarding Security appliance->Firewall

AjitKumar · ‎Aug 16 2018

Hi, We have 2 options here (that I can think of). 1) You can segregate APs in two groups (Use TAGs to group APs). Assign VLAN as Per the TAGs. https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/VLAN_Tagging_on_MR_Access_Points 2) You may Dynamically assign VLANs to users with the help of Radius server. https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/VLAN_Tagging

AjitKumar · ‎Aug 16 2018

Hi I understand API can be of some help here. (I may be wrong though) https://dashboard.meraki.com/api_docs#create-a-network One can create a script and call it multiple times i.e 3700. I believe this shall create empty network. We can add devices later. There are some more option in the documentation. Note: I have no knowledge of programming. Also I have never tried APIs. Lets wait for comments from someone who has already done this.

AjitKumar · ‎Aug 15 2018

Hi Philip Glad to see the Network diagram. This gives a better clarity. Thank you for sharing. I believe NAT shall be the option to expose any service/application to public. Bandwidth control shall not be the problem as this can be defined in a policy and you may apply the same on the selected device. If you are seriously looking forward to assign a public ip to the device. I understand "No NAT" feature is available with latest firmware. I have not implemented this. I shall request @PhilipDAth to suggest the configuration as per your topology. Lets wait for his comments.

AjitKumar · ‎Aug 14 2018

Hi Philip MX 100 is a Security Appliance (Firewall/UTM). MS 425 is a L3 Switch (Top end offer from Meraki with various Features. Ideally for Distribution). There is no MX425 product I am aware of. 2 x 2960 for core and other 4 x 2960 for Access. This seems fine. Why do we need public ip for core switches? What shall be the role of MS425? Where will you define VLANs? Core Probably. Who will be the gateway? I may have many more such crazy questions. Ideally one should need to define the roles of each device and shall design the network accordingly. Well this is my understanding with the limited knowledge I got. Certainly there are many community members to assist you with there exceptional experience.

AjitKumar · ‎Aug 14 2018

Hi Philip, That shall be easy. You may simply create a "Policy" with the desired parameters and apply the same on device A or Device B. Find the following url for more information https://documentation.meraki.com/MR/Group_Policies_and_Blacklisting/Creating_and_Applying_Group_Policies

AjitKumar · ‎Aug 10 2018

Hi, I hope below checks are made. 1. Ideally the Access Point shall be connected on a Trunk Port. 2. The Native VLAN on the Trunk shall have DHCP enabled and have Internet Access. (Unless you want to configure it manually from the Local Status Page) 3. Firewall If Any, on the Native VLAN shall allow access to Meraki Cloud. You shall also consider the inputs from Philip. 1. Verify the messages on the Local status of the AP. Specially "Ethernet", "Internet" and "Cisco Meraki cloud" sections under Access Point Details. 2. Verify the IP Address allocated to Access Point on your DHCP Server. Is the IP Address Pingable? Is the firewall blocking any kind of access for that IP? 3. Factory reset the device and try again. (Optional)

AjitKumar · ‎Aug 7 2018

Hi, I believe the smaller hardware will have low specifications as they are meant for less load/users. If not MX100 you may consider to upgrade to MX84 that may work out more economical. https://meraki.cisco.com/products/appliances#models

AjitKumar · ‎Aug 3 2018

Hi, In case you want to Ping / Access a service from internet for a server which is hosted in LAN. You can do either create a NAT Rule or do a Port Forwarding. Both the options are available in Security Appliance->Firewall. You may read the following documentation for complete information. https://documentation.meraki.com/MX-Z/NAT_and_Port_Forwarding/Configuring_1%3A1_NAT https://documentation.meraki.com/MX-Z/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_MX

AjitKumar · ‎Aug 2 2018

Hi Philip Congrats I believe this was one of your suggestion during Masters Session.

AjitKumar · ‎Jul 31 2018

Hi, "Track by IP" is not currently supported in combined networks. You need to "Split" the combined network under Organization->Overview. You may also refer to following urls for more information https://documentation.meraki.com/zGeneral_Administration/Organizations_and_Networks/Combined_Dashboard_Networks https://documentation.meraki.com/MX-Z/Monitoring_and_Reporting/Client_Tracking_Options

AjitKumar · ‎Jul 30 2018

Hi My understanding is Meraki have 2 Gateway products 1. MX.xx 2. Z.x MX.xx are security appliances meant for Small, Medium and Large Enterprise supporting two WAN Links. Z.x are for Teleworker (Work from Home) kind of environment supporting one WAN Link. Both of the products fully support Auto VPN. One can have combination of them or can have only MX.xx or Z1.x in a network.

AjitKumar · ‎Jul 27 2018

Hi Francis The following url may help you. https://documentation.meraki.com/zGeneral_Administration/Other_Topics/Firewall_Rules_for_Cloud_Connectivity

AjitKumar · ‎Jul 26 2018

Hi, Excerpts from the followed url suggests "While in low power mode, the MR will disable its Air Marshal radio as well as one out of three transmit streams on the 2.4 GHz band (leaving two transmit streams still operating). Despite being in low power mode, the device can still supply full 802.11ac capabilities." https://documentation.meraki.com/MR/Monitoring_and_Reporting/Low_Power_Mode

AjitKumar · ‎Jul 25 2018

Hi Hope you have referred the following url https://documentation.meraki.com/MX-Z/Access_Control_and_Splash_Page/Customizing_the_Splash_page However as Adam said one should have HTML knowledge to customize.

AjitKumar · ‎Jul 20 2018

Hi, You may refer to following url too. https://community.meraki.com/t5/Security-SD-WAN/Need-internet-activity-log-of-each-client/td-p/7649

AjitKumar · ‎Jul 20 2018

Hi, Please check the following url. https://documentation.meraki.com/MR/Deployment_Guides/Wireless_Voice_Deployment_Guide_(CVD)#Microsoft_Lync_.2F_Skype_for_Business This seems to contain the list of servers and ports we need to work on. You may create a policy with the required information and apply the same on the desired device. Hope this helps you. [I am sure you know how to create and apply a policy]

About AjitKumar

AjitKumar

Ajit

Community Record

Badges