Translate route in linux to MX64

RafaelLeite
New here

Translate route in linux to MX64

Hi,

 

I have one server where in the server have route gw, for exemple:

 

route add -net 10.2.0.0/24 gw 192.168.0.1

 

How to get this route and set in the Meraki MX64?

 

Thanks.

3 REPLIES 3
ww
Kind of a big deal
Kind of a big deal

 

so you just add the subnet. and the next hop(gw)

Yes i create this, but in the dot where my IP is 10.9.0.0 don't passing internet, I ping from one pc from other, but not ping from internet, and in my server linux where I set this comand I ping for internet.

Hi,

In case you want to Ping / Access a service from internet for a server which is hosted in LAN.

You can do either create a NAT Rule or do a Port Forwarding

Both the options are available in Security Appliance->Firewall.

 

You may read the following documentation for complete information.

https://documentation.meraki.com/MX-Z/NAT_and_Port_Forwarding/Configuring_1%3A1_NAT

 

https://documentation.meraki.com/MX-Z/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_M...

 

Regards,
Ajit
AjitsNW@gmail.com
www.ajit.network
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels