Meraki

Inderdeep · ‎Apr 14 2021

@Saralyn @Thanks for the update

Inderdeep · ‎Apr 14 2021

So go with MS410-16 which will give you 16x1G SFP ports and 2x10G SFP+ Uplinks

Inderdeep · ‎Apr 14 2021

You need 12 ports on each switch ? Is that for Aggregation switches ? The minimum in Aggregation category is MS410-16 which will give you 16x1G SFP ports and 2x10G SFP+ Uplinks

Inderdeep · ‎Apr 14 2021

Thanks @MeredithW : i got my first Meraki Swag today ..

Inderdeep · ‎Apr 14 2021

I will surely provide you the comparison soon 🙂

Inderdeep · ‎Apr 14 2021

Yes you can do 1:Many NAT on Site to site VPN, have a look on below link and check for 1-to-many (1:M) VPN NAT there https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

Inderdeep · ‎Apr 14 2021

MS410 is good as Aggregation as MS425 is an overkill, rest you can use based on what the requirement on the accessible stackable switches from MS225,MS250 or MS350.

Inderdeep · ‎Apr 14 2021

I think MS410 is good for you with 1G ports and 10G uplinks.

Inderdeep · ‎Apr 14 2021

Here we go as per your requirement on Aggregation, Do you require 1G or 10G, SFP or SFP+ ? Check below

Inderdeep · ‎Apr 14 2021

See the difference, highlighted in Yellow for these 3 switches and choose accordingly based on your requirement. All three switches are POE capable. Secondly, what Cisco 9300 model you have, i will match and let you know the Meraki model

Inderdeep · ‎Apr 14 2021

Have a look, this is something the same problem encountered with these two cases, read these https://community.meraki.com/t5/Security-SD-WAN/MX-DHCP-leases-exhausted/m-p/71416#M17877 Another one https://community.meraki.com/t5/Security-SD-WAN/DHCP-Exhaustion-where-to-view-in-the-Meraki-Dashboard-and-how-to/td-p/60917 Releasing the IP address https://community.meraki.com/t5/Developers-APIs/Detecting-Lease-Exhaustion-and-Freeing-Up-an-Address/m-p/53693#M1601

Inderdeep · ‎Apr 14 2021

What @kYutobi @MarcP said 😊

Inderdeep · ‎Apr 13 2021

@JonasResende : I saw that type of issue earlier here and the resolution is by reboot the upstream modem/router equipment and if that doesn't resolve reboot the MX. See this issue log https://community.meraki.com/t5/Security-SD-WAN/VPN-Registry-Disconnected-on-MX64/m-p/25338#M6158 Check this one as well https://community.meraki.com/t5/Security-SD-WAN/Urgent-VPN-Registry-Disconnected/m-p/71081#M17812

Inderdeep · ‎Apr 12 2021

@bjk As @BrandonS says, you can put the firewall rules to block all the adult content for a library. You can make use of your Internet DNS pointed to Cisco Umbrella instead of your local service provider or Google whatever is now pointed. The traffic flow from the internet to your site via Cisco Umbrella. The Umbrella IPv4 addresses are: 208.67.222.222 208.67.220.220 The Umbrella IPv6 addresses are: 2620:119:35::35 2620:119:53::53

Inderdeep · ‎Apr 12 2021

Content filtering is also available with the Advance security license only but not available with Enterprise license.

Inderdeep · ‎Apr 12 2021

When you say Security from the internet what features you need ? 1. IPS/IDS 2. Advance Malware Protection 3. DNS security 4. Threat Grid All these are not available on the enterprise license of MX.

Inderdeep · ‎Apr 12 2021

To integrate Cisco Umbrella with Meraki MX you still need Advance Security license. Check the below link and check for "Features by License Option" on the link below you will get to know. https://documentation.meraki.com/General_Administration/Licensing/Meraki_MX_Security_and_SD-WAN_Licensing and so integration with Cisco Umbrella https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Manually_Integrating_Cisco_Umbrella_with_Meraki_Networks

Inderdeep · ‎Apr 12 2021

So you have enterprise license on the MX ?

Inderdeep · ‎Apr 12 2021

if you have advance security license then no body cares about the Cisco Umbrella as you have all the security features on the box.

Inderdeep · ‎Apr 12 2021

@bjk : OpenDNS which is now Cisco Umbrella (Cloud DNS security and Proxy) has manual integration with Meraki MX Have a look on below link for your reference , Check out the Meraki Group Policy with Umbrella https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Manually_Integrating_Cisco_Umbrella_with_Meraki_Networks

Inderdeep · ‎Apr 12 2021

@Marsrock2021 : yes you can go ahead with the 40G DAC cable but are you sure it is compatible with Meraki ( that is important). Second option is feasible of course. I am afraid of the DAC cable with 10m which i think not available. I saw one of the 40G DAC cable with 3M is compatible with Meraki as below https://www.optcore.net/product/ma-cbl-40g-3m-c/

Inderdeep · ‎Apr 12 2021

@Crocker Have a look on the below document showing about the group policies https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Creating_and_Applying_Group_Policies https://documentation.meraki.com/MX/Content_Filtering_and_Threat_Protection/Content_Filtering/Content_Filtering_Troubleshooting

Inderdeep · ‎Apr 12 2021

@sj093 : hope it clarifies as discussed

Inderdeep · ‎Apr 12 2021

Have a look on the license FAQ https://documentation.meraki.com/General_Administration/Licensing/Meraki_MX_Security_and_SD-WAN_Licensing I think the basic license is enterprise license and you should need it. Meraki will not work without license.

Inderdeep · ‎Apr 12 2021

@MarcP :you will definitely get the swag, high command @MeredithW

About Inderdeep

Inderdeep

Inderdeep Singh

Community Record

Badges