Hello, Group policy via API is quickest way I could think of. However, are you using templates in your organization? it should be possible via templates if you use them. ... View more

Hello, You can access local status page of the MX via http://mx.meraki.com , http://wired.meraki.com https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page The IP varies for different MX models but you can look into the above document and get more information on how to do it via IP. It is much easier to leave the client on dhcp and  navigate via your browser and make sure you are directly connected to MX and not connected to any WIFI network on your client ... View more

You can find the links via your dashboard   1-go to help > API docs > organizations > List the uplink status of every Meraki MX and Z series appliances in the organization   2-go to Help > API docs > Devices >Get the uplink loss percentage and latency in milliseconds for a wired network device ... View more

Hello @SCC , As per the document https://documentation.meraki.com/MV/Initial_Configuration/MV_Cloud_Archive it seems that the Copies of video are stored on both the camera and in the cloud. On-camera recording does not change. So the same recording is stored locally and on cloud. It would not add up the days on stage retention. Let me know if any concerns ... View more

Hello, Where do you see this error? on the client or on the dashboard? There are multiple factors that are responsible for Client's connection to AP. The process is as follows https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Analyzing_Wireless_Packet_Captures#802.11_Client_Authentication_Process ... View more

Buenas tardes Esto puede requerir una mayor resolución de problemas con las capturas de paquetes y otros registros. Recomendaría abrir un caso con soporte y solución de problemas para el mismo. ... View more

Thank you for the information. Under site to site VPN >  VPN settings make sure the networks are allowed to talk over VPN. If the issue still persists then it may need further troubleshooting via packet captures so I would recommend opening a case with Meraki Support for further troubleshooting. ... View more

Hello, In my experience, I've noticed that the clients would only show up under the Client page if it passes some significant amount of data through the devices. However, the client should show up on the client page after that and if it does not then that would be unexpected behaviour. ... View more

Hola Me gustaría hacerle algunas preguntas. ¿Están el MR33 y el MR52 en la misma red? ¿Cómo está configurando la autenticación con Cisco ISE? ¿Es para WPA2-Enterprise con RADIUS usando Cisco ISE?   ¿Qué quiere decir con no mostrar una ventana de autenticación? ¿Está en un cliente o mientras se configura en el tablero?     https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_with_WPA2-Enterprise#Configuring_WPA2-Enterprise_with_RADIUS_using_Cisco_ISE ... View more

Hello, There is no option like that on the dashboard which would pull the data into a shared folder.  However, there are some  similar options via API calls like   #list-the-uplink-status-of-every-meraki-mx-and-z-series-appliances-in-the-organization #get-the-uplink-loss-percentage-and-latency-in-milliseconds-for-a-wired-network-device   Although, I am not sure how to automate the calls and export the output to somewhere you need. Hope this will help you. ... View more

Hello, I'm not sure if I completely got your issue. If you could describe a bit more in detail. I'm guessing the system is unable to access the server. Packet captures at the LAN interfaces would be a good place to start. Let me know if any questions or concerns. ... View more

Hello, I believe MAC flap logging is a recent firmware addition which is present in 12.x firmware. These logs indicate a possible loop due to redundant link not staying in a blocking state. You may want to create a case with support for troubleshooting and detecting the source of the issue. ... View more

Hello, If you are moving the DHCP server from the Windows server to Meraki Switch there is currently no way to move over the reservations. You would need to add them manually.  ... View more

Hello, The best place to start would be a packet capture on the port where the MV is connected to determine if there is any traffic before connecting to wireless. You can also try swapping the cables. Please feel free to open a case with Cisco Meraki Technical support for further troubleshooting and analysis. ... View more

Group policy has 3 options  -To follow the network default Firewall and Shaping rules  -Ignore network default  Firewall and Shaping rules -Custom Firewall and Shaping Rules Appending the default rules for L3 is not possible. However, it is possible to append URL and blocked website categories on group policies. The best way to permit a special port according to me would be set to custom rules for firewall and add all default rules with an additional rule as needed. ... View more

Hello, I don't think there is a direct API call for the MAC table of a switch. A similar query is for clients of a device is below https://n219.meraki.com/Meraki-Stack-app/n/UVQTnbvc/manage/support/api_docs/v1#list-the-clients-of-a-device-up-to-a-maximum-of-a-month-ago ... View more

Hello, I tried recreating your issue and it seems the body would need exact network types like of the previous network. So for you  This (cellular_gateway', 'switch', 'wired' or 'wireless') needs to match ('cellular_gateway', 'switch' or 'wireless')   Can you try adding the option "appliance" in your "productTypes" and see if you are able to create one.   Thank you ... View more

Hello, I would recommend opening a case with Meraki's support as it may need troubleshooting to diagnose the source of the issue. ... View more

Hello, As per Meraki's  documentation, the types of certs supported are mentioned here https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_with_WPA2-Enterprise#Add_a_Trusted_Certificate_to_NPS According to me any 1 certificate option of the above 3 option should suffice. Thank you ... View more

Hello, 1-  If the customize includes the addition of information not available on the dashboard then unfortunately it would not be possible. There are limited changes you can do in terms of customizing the dashboard like customizing your summary report.   2- You can with API calls  https://n216.meraki.com/o/3yCuOd/manage/support/api_docs/v1#list-the-uplink-status-of-every-meraki-mx-and-z-series-appliances-in-the-organization The only page close to that information on dashboard is Org overview but will not detail the connectivity per WAN   3- Similar to 2nd only thing close to it is if you go to Org > overview > devices> select the devices by type > add the uplink 1 and 2 column and you can download the report. But it would not give the connectivity. However, you can explore API to get those information ... View more

Hello, Trunking VLANs between the stacks should not be a problem. I would like to know more about how you are setting up L3 interfaces as it is recommended to set them up at the core stack. ... View more

Hello, Unfortunately, the alerts will be sent out to all emails configured. There is no mechanism to switch emails with respect to timings. It could be a good feature to request via the 'Make a Wish' button on the dashboard. ... View more

Hello, A few questions for you. Were you able to use the gallery for photos prior to the update? Any other similar app which is managed or unmanaged can access gallery? also, if you can provide more details on a webpage. if it is via a browser or inside a managed or unmanaged app? ... View more