Meraki

BlakeRichardson · ‎Jul 12 2020

Trying using content filtering to block the following, make sure you are not type www. at the beginning. facebook.com fbcdn.net fbcdn.com

BlakeRichardson · ‎Jul 12 2020

Well done @Network-dad and @DarrenOC

BlakeRichardson · ‎Jul 8 2020

@SarthakRane Not that I can see, the event logs don't show this information either. I agree this would be useful in regard to troubleshooting.

BlakeRichardson · ‎Jul 8 2020

1. There isn't really a standard height, as long as they are high enough so people cannot reach them but I would be careful to not put them to high otherwise it gets difficult to see peoples faces. 2. As long as the camera is installed correctly and the light shines from above the camera you shouldn;t have any problems.

BlakeRichardson · ‎Jul 2 2020

Welcome, nice to have you here.

BlakeRichardson · ‎Jul 1 2020

@GagnonCo Can you please post a screenshot of what you are seeing please.

BlakeRichardson · ‎Jul 1 2020

@Network-dad Congrats! Well done everyone though, top effort!

BlakeRichardson · ‎Jun 30 2020

Welcome @GGU , I've always wanted to go to Switzerland! I hope you find the community useful.

BlakeRichardson · ‎Jun 30 2020

Welcome!

BlakeRichardson · ‎Jun 29 2020

@Noffal This article will help you. If you are setting them up as a HA pair then you only need the one license, if you want to physically swap them yourself I would purchase a second license. https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair

BlakeRichardson · ‎Jun 24 2020

@vassallon All of my profiles require a password to remove.

BlakeRichardson · ‎Jun 22 2020

@vassallon I have even disabled the old profiles so there is no scope for them at all, the dashboard reports the profile is out of date but refreshing them still wont remove them. I think you have uncovered a bit of a design floor, whether its an Apple or Meraki flaw who knows.

BlakeRichardson · ‎Jun 22 2020

@vassallon I've update the device, moved it from one SM network to another and I am also finding the device is holding onto old profiles.. Sorry I misread your inital post and so my first testing was only checking device tagging not moving between networks. So yes I am having the same issue as you and the "refresh profiles list" doesn't seem to remove old profiles.

BlakeRichardson · ‎Jun 22 2020

@vassallon 13.31, I can update the OS and try again.

BlakeRichardson · ‎Jun 22 2020

Ok I have just changed one of our iPads and the old profiles i.e. seperate wifi, settings and wallpaper profiles have been removed and replaced with the new profiles. Its working for me as expected. I would ask to have your case escalated, could well be a support person that isn't familiar with SM.

BlakeRichardson · ‎Jun 22 2020

@vassallon Agree profiles should not remain on a device. I'll do some quick testing on a spare device and report back.

BlakeRichardson · ‎Jun 22 2020

How are the devices installed, are they stacked one on top of another? I always keep the tops of my devices clear so they can "breathe" If you are concerned its not normal contact support and they can check the devices internal temperature.

BlakeRichardson · ‎Jun 18 2020

@Marco_812 I would start running a packet capture, then connect on of the Macbooks, give it time until the device self assigns and then end the packet capture. Then you can have a look at that capture and it should give you an idea of what is going on. I wonder if there is some odd routing loop on your network thats been created by accident. If you are unsure how to read packet capture files upload it here and I am sure someone can have a look.

BlakeRichardson · ‎Jun 17 2020

We had 10 iPads stolen about a year ago, I quickly setup a STOLEN tag and settings group that was deployed to all of the devices, that way if any of them came back online they would be bricked and display a nice wallpaper that clearly showed the device was stolen. The devices were registered in DEP so there was no way around this without jailbreaking the device. I also setup an alert that reported when the devices came online so I could log IP address information that was passed onto the police. The end result was unearthing a large scale stolen goods and drugs ring. Of the 10 devices 1 was recovered.

BlakeRichardson · ‎Jun 17 2020

Yes this should work, you can setup "geofencing" that will help you monitor this and create settings that work off the geofencing.

BlakeRichardson · ‎Jun 17 2020

Very nice! Thanks for sharing!

BlakeRichardson · ‎Jun 16 2020

Welcome @HardBoiledGreg which one is the bat phone?

BlakeRichardson · ‎Jun 16 2020

Welcome David, nice to have you here!

BlakeRichardson · ‎Jun 16 2020

Welcome @Josh_Vooris. Congrats on passing CMNA

BlakeRichardson · ‎Jun 15 2020

Congrats guys, top notch effort as usual!

About BlakeRichardson

BlakeRichardson

Community Record

Badges