Meraki

BlakeRichardson · ‎Nov 24 2021

@PacerX When you say the switch is no longer connected do you mean you have just phsyically unplugged it or have you actually removed it from the network using the inventory page on your dashboard?

BlakeRichardson · ‎Nov 21 2021

I am not sure what you mean as a switch acting as an access point. Do you have only one vendor of wireless access point or multiple?

BlakeRichardson · ‎Nov 21 2021

Can you confirm the following. 1. Radio setting 2.4 / 5Ghz or both? 2. Authentication method - Radius, PSK? 3. Encryption method Association errors usually mean that device isn't connecting to the network properly or something is stopping it before it can authenticate . Can you post a screenshot of the SSID settings blurry any confidential info if neeed.

BlakeRichardson · ‎Nov 21 2021

I guess thats what happens with things become popular and they need to be dumbed down because people don't know how to read a required ports list.

BlakeRichardson · ‎Nov 18 2021

@themru Licesning is also not trasnferred between organisations so bear this in mind.

BlakeRichardson · ‎Nov 17 2021

Can you provide a basic drawing of how everything is plugged in, do you have multiple leads running between the wifi router and MX. From the info you have provided I can't determine how you have everything connected.

BlakeRichardson · ‎Nov 15 2021

@MFuchs have you checked the windows firewall settings?

BlakeRichardson · ‎Nov 15 2021

Nice I wondered what was going on when I logged in this morning.

BlakeRichardson · ‎Nov 14 2021

BYOD in a corporate environment is a pain, if your company can afford it I would supply fully managed devices. Make config and app rollout much easier in the long run.

BlakeRichardson · ‎Nov 9 2021

A generic status page would be good for users that cannot access their dahsboard due to an outage and that are not part of the community. i.e. status.meraki.com But thanks for having this info listed in the community, hopefully it will stop the duplicate posts whenever there is an issue.

BlakeRichardson · ‎Nov 8 2021

@cmr smashed it out of the park!

BlakeRichardson · ‎Nov 3 2021

Always happy to provide feedback, both positive and constructive. My suggestion for the community was a swag store! Take my money!!!!!! 🤑🤑🤑

BlakeRichardson · ‎Oct 31 2021

You shouldn't be using anything lower than Cat5e if you want gigabit speeds. Ideally you should be using Cat6a I personally wouldn't be using anything lower than Cat6. Just remember as well as your structured cabling being a specific type your patch leads need to match it as well. I check any cable before I use it and if it's lower than cat6 it gets recycled.

BlakeRichardson · ‎Oct 28 2021

Does the printer have any IP filters enabled on it? If you plug into the printer directly can you access it? (you might need to setup a local DHCP serivce to do this.)

BlakeRichardson · ‎Oct 21 2021

Part 2 is where you link it to your dashboard using the API and its colour changes depending on the status of your network. Is this going to be a new theme, how can you modify Meraki swag?

BlakeRichardson · ‎Oct 21 2021

It turns out that even if you delete devices from your network but they are still loaded into your DEP then they are still technically in Meraki so will show in any settings profiles they were scoped to before they were deleted. Once you remove them from your DEP (only do this if you are disposing obviously) they they disapear from Meraki. The other alternative is remove any tagging from devices before you delete them. To me this just seems like bad programming but what can you do.

BlakeRichardson · ‎Oct 20 2021

I have checked to documentation and it makes no mention of having to un-scope devices. Log in to Dashboard, and select the appropriate SM network. Navigate to Systems manager > Monitor > Devices Mark the checkbox for each device to remove. At the top of the Client list, select Delete > Remove from Network.

BlakeRichardson · ‎Oct 19 2021

Welcome @Almanac

BlakeRichardson · ‎Oct 19 2021

@DjShroll Awesome thanks for sharing the outcome!

BlakeRichardson · ‎Oct 19 2021

@kevinmodonnell You have you answer but just FYI POE is an industry standard just like Wifi, Radius etc. Meraki doesn't care if you mix their hardware with other equipment.

BlakeRichardson · ‎Oct 17 2021

@Eddie01 This is a good reason why as much IT equipment as possible should be on a UPS if you can afford it.

BlakeRichardson · ‎Oct 13 2021

If you have simply changed to VLAN tagging on the port the client is connected to and have not physically moved the switch port its plugged into then you will need to renew the DHCP lease on the client itself. Easiest way would be the restart the device.

BlakeRichardson · ‎Oct 12 2021

@MKK What you are asking isn't possible with any vendor, firewalls just don't simply work like that.

BlakeRichardson · ‎Oct 4 2021

@MarcP Have the users checked their junkmail?

BlakeRichardson · ‎Sep 21 2021

About BlakeRichardson

BlakeRichardson

Community Record

Badges