Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About MauroF
Community Record
85
Posts
10
Kudos
3
Solutions
Badges
Oct 16 2024
11:45 PM
Hi guys! I have an MR46 that I want to connect in mesh mode with a Z4C. I’ve tried everything, but I can’t get it to connect as a repeater. Both devices are on the same network, and the SSID is configured and enabled only on the Z4C. What am I doing wrong? Any advice? Mauro
... View more
Labels:
- Labels:
-
SSID
Resolved: the management network (switch-AP) wasnt router in the SD-WAN.
... View more
Oct 11 2024
2:20 AM
Hi all, I have a HUB-SPOKE infrastructure at the SD-WAN level. My syslog server is behind my HUB. I have configured the SPOKE side to reach the syslog server, following these steps: Network-wide → General → Syslog → Add syslog server, etc. However, I’ve been informed that the syslog server is receiving logs from the MX devices but not from the APs and switches on the HUB side. Do you have any suggestions for resolving this issue? Thanks.MAU
... View more
Oct 10 2024
12:37 AM
Hi everyone, Due to the well-known delay with the MV, I decided to use the RTSP protocol for live streaming. Can anyone recommend a simple third-party app to view the stream? I'm currently using OBS, but I can't seem to figure out the correct URL since the one provided by my MV93 (rtsp://10.128.2.9:9000/live) doesn't work. Any help would be appreciated. Thanks! Mau
... View more
Oct 7 2024
3:57 AM
Hi, I am experiencing two issues with my MV cameras: There is a 5-second delay in the video feed on my Video Wall. I have a mix of MV63 and MV93 cameras. Is there e solution? Is there a way it does NOT automatically disconnect the Video Wall every hour? Thank you for your assistance. Mauro
... View more
Labels:
- Labels:
-
Quality
-
Video wall
Sep 4 2024
1:48 AM
Does changing this configuration(uplink client sampling) create any issue with the network?
... View more
Aug 30 2024
3:48 AM
Hi Philip, first of all thanks for your time to answer to my questions. The only thing im have to understand is if i can use a local internet connection from my spoke networks to go to umbrella or not. Cause you are telling me that i need to use SD_WAN (passing though the HUB) and i dont want to go through it to get to the Umbrella network. Can you kidnly clarify that to me? Thanks.
... View more
Aug 30 2024
1:07 AM
Hi, im doing a script to create a daily report stating who was connected in the last 24 hours and when it was the last time they got disconnected from the network (wired and wireless). An example of what i created. networkName userId description mac ipV4 usage clientType lastSeen(UTC+2) Cincinnati frank.zappa@rock.com ZU103CSC dd:c6:af:21:e1:97 192.168.17.208 82.786 MB Wired 8/29/2024 23:07 There is one big issue thou. The lastSeen section is not true. The client left at 16:48 but ,dont know why Dashboard shows that. The part that show the real disconnession thou is going to the switch,under the interface configuration. Im trying to understand what python code i should script to get that info. Im not using Meraki library. Any Help?
... View more
Labels:
- Labels:
-
Other
Aug 28 2024
5:23 AM
ok but you telling me i cannot rich Umbrella via a local brekout form a Spoke? MUST I pass through SD_WAN?
... View more
Aug 28 2024
2:54 AM
In the spoke sites, (split tunnel configured) users going in Internet will need to get to Umbrella and i need protection. So the vMX (where the Umbrella configuration should be configured) need to provide that security. So ,getting back to the beginning: 1) What license is required for the vMX to integrate with Umbrella, considering I need advanced features like threat analysis and content control? I assume the Advanced Security license is needed. 2) Should I use Umbrella DNS Security Advantage for this? 3) Is the Umbrella license based on a "per user" or "per VLAN" ? Hope is clear now.M
... View more
Aug 28 2024
2:12 AM
it's used only as a HUB for SD-WAN. All the traffic then is sent to the Gateway VPN (same vnet)
... View more
Aug 28 2024
12:25 AM
Hi all, I want to integrate my vMX (Hub) with Umbrella (i have 10 sites as spokes). I plan to create two Identities in Umbrella with a Default Policy (Guest & Employee). I have a couple of questions: 1) What license is required for the vMX to integrate with Umbrella, considering I need advanced features like threat analysis and content control? I assume the Advanced Security license is needed. 2) Should I use Umbrella DNS Security Advantage for this? 3) Is the Umbrella license based on a "per user" or "per VLAN" model? Thanks
... View more
Aug 16 2024
2:38 AM
for example: i set up my first decice (Android) and added facebook as mandatory app. i created a Android Profile simple and without restriction but i relaized once i pushed the APP to be installed on my phone..it doesnt. No sign on my phone. Any guest?
... View more
Aug 15 2024
11:48 PM
create new email address from?
... View more
Aug 14 2024
12:59 AM
Good morning, I'm trying to test the System Manager on an organization named "Test" to eventually implement it for a client. The main issue during testing is providing an email address for the organization. I'm unsure which one to use. If I enter my Google email, it tells me (understandably) that a company named Google already exists. Do you have any advice on how to test the System Manager?
... View more
Labels:
- Labels:
-
Android
-
Enrollment
Aug 14 2024
12:45 AM
What do you mean that works only in split tunnel? This vMX should be a HUB in Azure and the client sites will be all SPOKES. In this case can you elaborate what you mean with vMX in SPlit tunnel?Thanks for your time mate
... View more
Aug 12 2024
6:52 AM
Can a vMX in Azure used as an SD-WAN hub also serve as a Client VPN terminator?Thanks
... View more
Labels:
- Labels:
-
Azure
whats wrong with MS390?
... View more
forgot: im looking for a 8-12 switch Ports MAX
... View more
Jul 29 2024
5:57 AM
Cisco /Meraki switch with at least 40W POE per port?
... View more
Labels:
- Labels:
-
Other
Jul 22 2024
6:00 AM
A client is deciding whether to migrate their network infrastructure to DNA or Meraki Monitoring for their Catalyst 9300 switches. Can I get the pros and cons of each option? Thanks. M.
... View more
Jul 16 2024
9:45 AM
is ther a way Ale, to nat private to private in Meraki? I mean....i need to NAT via VPN a private IP with another Private IP.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 210 | Nov 13 2024 11:05 PM | |
| 392 | Nov 11 2024 5:49 AM | |
| 288 | Oct 11 2024 3:12 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 340 | |
| 2 | 288 | |
| 2 | 744 | |
| 2 | 455 | |
| 1 | 187 |
© 2024 Cisco Systems, Inc.
