Wireless clients are not distributed eventually.?

JaredReed
New here

Wireless clients are not distributed eventually.?

Hi,

 I have some MR42 in my organization floor. i noticed that wireless clients are not distributed eventually. Like one AP has 60 clients another AP has only 20 clients. Some users are connecting to a AP which is far way though there is AP near to client.
My scenario is: MX100<===>MS210-24P<===>MR42

 

What is the client load balance settings

2 REPLIES 2
merakichamp
Building a reputation

@JaredReed  there are number of things you need to know 

1. it depends with the firmware you APs is running on 

2.load balancing should be enabled by default depending on how you have configured 

3. the client should also decide where and when to connect and disconnect that is roaming client

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Client_roaming_and_connectivity_d...

https://documentation.meraki.com/MR/Other_Topics/Client_Balancing

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Seamless_Roaming_with_MR_Access_P...

PhilipDAth
Kind of a big deal
Kind of a big deal

Try setting the minimum bit rate to 12Mb/s.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels