zero touch provisioning

SOLVED
NABILOU
Here to help

zero touch provisioning

Hi,

 

I would like to deploy many configurations on many switchs, most of switch have same configuration but : the name, ip and default gateway.

 

Could you please tell how to deploy on many switchs and how to automate the name and ip add, default gateway for each switch ?

 

Thank you for your help

 

NM

1 ACCEPTED SOLUTION
BrandonS
Kind of a big deal

Check out Meraki.io for API documentation and demos.  Here is one that might be a good start for your requirements: https://create.meraki.io/build/google-forms-with-the-dashboard-api/

 

 

- Ex community all-star (⌐⊙_⊙)

View solution in original post

5 REPLIES 5
ww
Kind of a big deal
Kind of a big deal

you could use dhcp for ip and gw. 

 you can use API to push the name and others settings

NABILOU
Here to help

thank you a lot for your help. 

BrandonS
Kind of a big deal

Check out Meraki.io for API documentation and demos.  Here is one that might be a good start for your requirements: https://create.meraki.io/build/google-forms-with-the-dashboard-api/

 

 

- Ex community all-star (⌐⊙_⊙)
Adam
Kind of a big deal

You could also setup one switch and clone the configuration to the others in the dashboard.  With that method you still have to configure the switch static IP, name, location information.  But the ports would be config'd.

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.

Hi Adam, thank you for reply. I thought that I could deploy with configuration templates. I can't use this option
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels