cancel
Showing results for 
Search instead for 
Did you mean: 

zero touch provisioning

SOLVED
Highlighted
Here to help

zero touch provisioning

Hi,

 

I would like to deploy many configurations on many switchs, most of switch have same configuration but : the name, ip and default gateway.

 

Could you please tell how to deploy on many switchs and how to automate the name and ip add, default gateway for each switch ?

 

Thank you for your help

 

NM

1 ACCEPTED SOLUTION

Accepted Solutions
Head in the Cloud

Re: zero touch provisioning

Check out Meraki.io for API documentation and demos.  Here is one that might be a good start for your requirements: https://create.meraki.io/build/google-forms-with-the-dashboard-api/

 

 

5 REPLIES 5
ww
Head in the Cloud

Re: zero touch provisioning

you could use dhcp for ip and gw. 

 you can use API to push the name and others settings

Head in the Cloud

Re: zero touch provisioning

Check out Meraki.io for API documentation and demos.  Here is one that might be a good start for your requirements: https://create.meraki.io/build/google-forms-with-the-dashboard-api/

 

 

Kind of a big deal

Re: zero touch provisioning

You could also setup one switch and clone the configuration to the others in the dashboard.  With that method you still have to configure the switch static IP, name, location information.  But the ports would be config'd.

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Here to help

Re: zero touch provisioning

thank you a lot for your help. 

Here to help

Re: zero touch provisioning

Hi Adam, thank you for reply. I thought that I could deploy with configuration templates. I can't use this option
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels