configuration IP static switches

nst1
Building a reputation

configuration IP static switches

 

 

because I have several switches connected to the same switch and configured with static IP but some of them I already see them in the dashboard and some do not show me the message

 

 "This device is using a DHCP IP address from VLAN instead of using configured VLAN 1."

 

but all computers have the same network segment configured

 

What I can do ?????

5 Replies 5
BrandonS
Kind of a big deal

Did you type VLAN 1 when you entered static IP?  You want to leave that blank if you intend to have management on your native VLAN.

- Ex community all-star (⌐⊙_⊙)
nst1
Building a reputation

 

my switches have this configuration, but with different IP

 

Captura.PNG

PhilipDAth
Kind of a big deal
Kind of a big deal

This happens when the switch can not talk to the Meraki cloud using the configured parameters. Make sure their is not an upstream firewall blocking traffic.
Adam
Kind of a big deal

Also if you have rebooted the switches a few times, sometimes it just takes a bit to stabilize.  I've had to leave mine overnight with no changes on more than one occasion for them to finally take the static IP settings. 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
ww
Kind of a big deal
Kind of a big deal

did you set :

 

Configure > Switch settings and specify the desired VLAN in the "Management VLAN" section. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels