Wifi Branch Router | CAPWAP or EWLC Mode

hirathi
Here to help

Wifi Branch Router | CAPWAP or EWLC Mode

Does Wifi Branch Router run in CAPWAP Mode (with a controller on cloud) or in EWLC mode (where the router itself act as an embedded controller) or in both the modes? Do Access points also run in similar modes?

 

Also, where can I find the performance of these routers when Wifi is Enabled?

10 Replies 10
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @hirathi , you may want to post your query in the main Cisco Enterprise community forum.  This is for Meraki products and solutions.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DarrenOC
Kind of a big deal
Kind of a big deal

https://community.cisco.com

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
hirathi
Here to help

This is with respect to Meraki Branch routers only like MX64W etc. Do they have different modes like EWLC or CAPWAP? And also if access points like 9162 pertaining to meraki have such modes as well.

KarstenI
Kind of a big deal
Kind of a big deal

The Meraki APs work entirely differently than the "normal" Cisco WLAN.

They are comparable to FlexConect with local switching and local authentication by default. But without a CAPWAP tunnel, neither for Control nor for Data. 

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
hirathi
Here to help

And what about Meraki Branch Wifi Routers ? Do they also behave similarly without CAPWAP Mode? And do they run in standalone mode only ?

ww
Kind of a big deal
Kind of a big deal

 

The cloud/dashboard is the meraki brain /config. But you can use several setups, read this doc regarding the mr AP wifi

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/SSID_Modes_for_Client_IP_Assignme...

 

PhilipDAth
Kind of a big deal
Kind of a big deal

The MXs with integrated WiFi run as stand-alone access points, with their configuration orchestrated from the cloud.

TBHPTL
A model citizen

I wouldn't  advise the use of the integrated wireless on an MX in any situation. It is very limited.

However you could tunnel the APs back to a centrally located MX if you wanted to, either on prem or off prem, but then again, why would you want to?

hirathi
Here to help

If we do have Access Points, why do we even need Integrated Wifi Router? In that case what is the possible use cases which will help me decide purchasing a Wifi Router over an Access Point? 

KarstenI
Kind of a big deal
Kind of a big deal

My *only* use case is a small branch office where only one AP is definitely is enough and a restricted budget. This means I alsways try to drive the decision to an MX without Wi-Fi and a separate AP.

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels