cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX84 - Policy by IP block

New here

MX84 - Policy by IP block

Hi,

 

We have a MX84 in front of a router which has all the vlans configured.  Is there a way to configure group policies on a ip subnet basis instead of client per client?  Is it necessary to pass this vlans to the MX84?

 

Thank you 

Ricardo

1 REPLY 1
Meraki Employee

Re: MX84 - Policy by IP block

Ricardo_J, you can apply group policy to a subnet but instead must use the VLAN method. In doing so you would need to move the VLAN routing to the MX for that method to work. The thread below discusses a similar scenario and the second link is to the Group Policy documentation. https://community.meraki.com/t5/Security-SD-WAN/group-policy-per-vlan-and-switch-setting/m-p/24114 https://documentation.meraki.com/MR/Group_Policies_and_Blacklisting/Creating_and_Applying_Group_Poli... I hope that helps.
Adam Slater
Senior Technical Evangelist
Training & Evangelism Team
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.