AnyConnect on MX64

SOLVED
Rekun
Here to help

AnyConnect on MX64

Hi

Great to see MX 16.4 firmware ready to public beta!

 

I can see that AnyConenct is not available to MX64, are there any plans to add support at a later date?

1 ACCEPTED SOLUTION
ww
Kind of a big deal
Kind of a big deal

https://documentation.meraki.com/MX/AnyConnect_on_the_MX_Appliance#Feature

 

Supported MX models: MX600, 450, 400, 250, 100, 84, 68, 67, Z3, vMX

Future support: MX64, 65

Not supported: MX80, 90, 60, Z1

View solution in original post

24 REPLIES 24
ww
Kind of a big deal
Kind of a big deal

https://documentation.meraki.com/MX/AnyConnect_on_the_MX_Appliance#Feature

 

Supported MX models: MX600, 450, 400, 250, 100, 84, 68, 67, Z3, vMX

Future support: MX64, 65

Not supported: MX80, 90, 60, Z1

Rekun
Here to help

Thanks for the quick reply!

 

I will just have to wait a little longer then 🙂

DarrenOC
Kind of a big deal
Kind of a big deal

Or upgrade to an MX68! 😉

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
OVERKILL
Building a reputation

Interestingly, my MX64 has shown AnyConnect as being available (and I tested it, it worked) since the 16.xx betas. 

 

I'm not on 17.xx yet and I see this on the client VPN screen:

Screen Shot 2022-03-21 at 10.58.44 AM.png

KarstenI
Kind of a big deal
Kind of a big deal

Wow, that really confuses me ...

I again approached Meraki Support for clarification but still waiting.

CptnCrnch
Kind of a big deal
Kind of a big deal

I've already seen it working on MX64 in the meantime. Perhaps it's not yet rolled out onto your shard.

 

So I guess I stand corrected, but a big fat "thank you Meraki for making it possible"! 😎

KarstenI
Kind of a big deal
Kind of a big deal

Yes, that is a big thank for Meraki to give some more love to these devices. If it will work for my MX64 I can replace my VPN-Concentrator Z3 with the MX64 and use the Z3 for traveling instead of using the old Z1.

elDiego2608_0-1647903622158.png

 

elDiego2608_2-1647903683253.png

elDiego2608_3-1647903692678.png

So sad... i have a compatible version, the right FW, but no luck...

elDiego2608_0-1647581589794.png

 

So.... what now??

As MX64 is End of Life'd, there just one way: upgrade to MX67 (or MX75 directly).

And like magic... it's on! (thanks to the people behid this!)

 

elDiego2608_0-1647901603825.png

 

rwiesmann
A model citizen

I just got the information that the MX64 and MX65 will get anyconnect support with MX17.6 Release...

KarstenI
Kind of a big deal
Kind of a big deal

EDIT: likely this answer was not correct. There is hope ... 😉

Sadly, the release notes are wrong. I upgraded my MX64W to 17.6 but there was no AnyConnect. Meraki Support told me that there is no AnyConnect on this devices:

 

"Thank you for contacting Cisco Meraki Support.

The MX64 does not support Cisco Anyconnect at the moment. For more information about AnyConnect on the MX Appliance please refer to the documentation article below;
https://documentation.meraki.com/MX/AnyConnect_on_the_MX_Appliance#Caveats

I will set this case to closed. However, if you require any further assistance, please feel free to reach out by calling support or responding to this email and we can reopen the case and continue on from there."

rwiesmann
A model citizen

@KarstenI sorry for that...I only got an information on it, but did not test it myself.

See the attachement i got.

I will also ask back about it.

10_14_25.jpg

AnythingHosted
Building a reputation

I've upgraded one of our MX64s to 17.6 and I don't see the settings for AnyConnect yet.

same for me ...

rwiesmann
A model citizen

@KarstenI and @AnythingHosted  I just got the information that it should be available on all servers within a week. 

KarstenI
Kind of a big deal
Kind of a big deal

thanks for the info, I am waiting for over six years, one week doesn't bother me ... 😉

totally agree...if it is only a week more...we can wait 😉

KarstenI
Kind of a big deal
Kind of a big deal

And now AnyConnect shows up here on my MX64 network! 🙂

rwiesmann
A model citizen

Did now the upgrade of my own MX...AnyConnect ist there on my MX...yeah!

lpopejoy
A model citizen

Now, if only you didn't have to buy a minimum of 25 licenses to actually USE AnyConnect!

KarstenI
Kind of a big deal
Kind of a big deal

Yes, they have to be bought, but luckily the PLUS license is quite cheap.

Hmm, maybe I was looking at the wrong thing?  How much is cheap?  

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels