Documentation Digest: September 3rd - September 21st:

CameronMoody
Meraki Employee
Meraki Employee

Documentation Digest: September 3rd - September 21st:

documentationdigest.png

 

Hi Community,

 

Below are the most important changes to our documentation between September 3rd and September 21st:

 

Dashboard Data Storage Privacy and Security

Change: Updated with regions and screenshots

 

Manually Integrating Cisco Umbrella with Meraki Networks

Change: Updated to state DNS exclusion can also be entered on the Threat Protection page.

 

MS390 Series Installation Guide

Change: Added photo of StackPower cabling.

 

Network-Based Application Recognition (NBAR) integration with MR access points

Change: Added notes on disabling NBAR.

 

Sponsored Guest

Change: Updated with screenshots and new duration flexibility.

 

MI VoIP Health

Change: Note added that currently only SIP is supported for signaling.

 

Content Filtering and Threat Protection over Full-tunnel Site-to-site VPN

Change: Added more specificity on security functions.

 

Enabling, Disabling, and Changing SSID Names

Change: Clarified that bandwidth limit shown is per-client.

 

MX to Cisco ASA Site-to-site VPN Setup

Change: Updated link to ASA config guides.

 

MS425 Series Installation Guide

MS225 Series Installation Guide

Change: Clarified that rack mount rails are not included.

 

Cisco Meraki and Umbrella Integration - MR Advanced/Upgrade License

Change: Added notes explaining PDL license movement.

 

Syslog Event Types and Log Samples

Change: Added more log samples.

Cameron Moody | Product Manager, Cisco Meraki
2 REPLIES 2
nickydd9
Getting noticed

@CarolineS it seems the Documentation Digest is no longer being tagged with the label so it broke the email subscriptions.

@nickydd9 Thanks for the heads up! Fixed it on this one (though I’m not sure if you’ll get a notification retroactively) and we will be sure to add in the future!

Caroline S | Community Manager, Cisco Meraki
New to the community? Get started here
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.