Before and After Pictures

PhilipDAth
Kind of a big deal
Kind of a big deal

Before and After Pictures

Show us your before and after pictures after you have replaced something with new Meraki kit.

 

I just spent the whole weekend ripping out 500 ports of switching in a factory and putting in all new Meraki kit.  These pictures are one of the four main wiring cabinets - before and after the job was done.

 

Before.jpgAfter.jpg

120 Replies 120
MerakiDave
Meraki Employee
Meraki Employee

Lot of work.  Thanks for sharing, very nicely done!!

MerakiDave
Meraki Employee
Meraki Employee

Here's one of my own "before and after" stories.

 before and after.jpg

Ok, just kidding, stretched the truth a little, but you get the idea. 🙂 

theWIFIguy
Here to help

I can barely see any cables... some serious cable management right here...

RonG
Here to help

Wow!  What a mess.

PhilipDAth
Kind of a big deal
Kind of a big deal

Here is another before and after.  In this case, the customer said thay wanted to be able to "see" where the patched ports plugged into the switch, without having to riffle through the cabling.

 

IMG_20181220_161535.jpgIMG_20181220_171039.jpg

Nick
Head in the Cloud

Some nice work!

 

I see a lot of these installs using what looks like slimline patch cables? Can anyone name a brand or provide a link to cabling they use that they would recommend to others?

 

Thanks

Nick
Head in the Cloud

After a recent set of installs before and afters

 

IMG_2779.JPGIMG_2786.jpg

 

IMG_6675.JPGIMG_2792.JPG

PhilipDAth
Kind of a big deal
Kind of a big deal

@Nick what part of the world are you in?

Nick
Head in the Cloud

UK! @PhilipDAth 

Nick
Head in the Cloud

Found the last of the three cabs we did on that install 

 

It really shouldn't be. But tidying cabs is rather therapeutic I find! 

 

IMG_6671.JPGIMG_9518.jpg

Nick
Head in the Cloud

We're seemingly on a roll here doing cabs at the moment so like a proud father I thought i'd throw up another

 

Still on the lookout for some slimline cat6a patch cabling if anyone knows of a good vendor?

 

 

IMG_3540.JPGIMG_3538.JPGIMG_4908.jpg

PhilipDAth
Kind of a big deal
Kind of a big deal

@Nick I  buy my slimline cables from CDL - but I suspect they wont be in your bit of the world.  All the codes begin with PLS.  I mostly use yellow, and then begin with PLSY.

 

https://cdlnz.com/search?q=PLS

Nick
Head in the Cloud

Nice - thats the sort we want

I will do some searching thanks Philip
Ben
A model citizen

Here you go, one from yesterday. Swapped out old cisco's for Meraki MS225. 

 

 

BeforeBefore

 

 

 

 

 

 

 

 

AfterAfter

Csanchez15
Comes here often

 ¡Woah! 

Meraki Rocks !!!!!!

WadeAlsup
A model citizen

Hardly knew what I was doing...my first real tear out and try to clean up...turned out better than I thought it would, though!

 

IMG_0945.JPGIMG_0946.JPGIMG_0947.JPGIMG_0950.JPG


Found this helpful? Give me some Kudos! (click on the little up-arrow below) and If my reply solved your issue, please mark it as a solution 🙂
PhilipDAth
Kind of a big deal
Kind of a big deal

Much better!
BeachBum
Here to help

Nice work!

 

I used Neat Patch for my last major install, works great.

Mr_IT_Guy
A model citizen

Here's my before and after

Before and After.jpg

Found this helpful? Give me some Kudos! (click on the little up-arrow below)
AdamS
Meraki Employee
Meraki Employee

You have tamed the spaghetti monster. That is no small job. Awesome work! How long did that take?
Adam Slater
Content Engineering Manager
Product Enablement
Mr_IT_Guy
A model citizen

@AdamS, That took 4 guys and 17 hours. We started at noon on a Saturday and finished around 5am. We ran into some missing ports in a newly renovated area of our office that ate up a bit of time. 

Found this helpful? Give me some Kudos! (click on the little up-arrow below)
BHC_RESORTS
Head in the Cloud

@Mr_IT_Guy: Are those dual MX400s? Hate you a little bit.

BHC Resorts IT Department
Mr_IT_Guy
A model citizen

@BHC_RESORTS, would you hate me more if they were dual MX600s? If so,  then yes those are simply dual MX400s....

Found this helpful? Give me some Kudos! (click on the little up-arrow below)
MRCUR
Kind of a big deal

@Mr_IT_Guy @BHC_RESORTS I see your dual MX600’s and raise dual MX450’s. E4A6248E-B2F3-4E8E-8EC0-E81E8177E511.jpeg

 

MRCUR | CMNO #12
Mr_IT_Guy
A model citizen

@MRCUR yeah, those are pretty nice sir!! 

Found this helpful? Give me some Kudos! (click on the little up-arrow below)
AdamS
Meraki Employee
Meraki Employee

Very nice shot, but may I suggest the framing would be better with some MS425's under that ;-).

Adam Slater
Content Engineering Manager
Product Enablement
Mr_IT_Guy
A model citizen

@AdamS The MS425s are pretty nice!

Found this helpful? Give me some Kudos! (click on the little up-arrow below)
BHC_RESORTS
Head in the Cloud


@AdamS wrote:

Very nice shot, but may I suggest the framing would be better with some MS425's under that ;-).


Looks like an HP 5406zl. One of my favorite switch chassis! Now if there was a Meraki switch chassis....wow would that be legit!

BHC Resorts IT Department
MRCUR
Kind of a big deal


@BHC_RESORTS wrote:

@AdamS wrote:

Very nice shot, but may I suggest the framing would be better with some MS425's under that ;-).


Looks like an HP 5406zl. One of my favorite switch chassis! Now if there was a Meraki switch chassis....wow would that be legit!


5406R without a second management module. I too really like this model and second the request for a Meraki chassis switch. 

 

I do have some MS425's as well since @AdamS mentioned it... 

 

UNADJUSTEDNONRAW_thumb_13d.jpg

 

UNADJUSTEDNONRAW_thumb_179.jpg

 

 

 

MRCUR | CMNO #12
PhilipDAth
Kind of a big deal
Kind of a big deal

I did another rip out and replace last night, MX MS and MR.  This is one of the cabinets.

Before.jpgAfter.jpg

francktls
Getting noticed

This morning :

 

Replaced old Alcatel switch to brand new Meraki MS120 at customer remote bureau. 399 sites to go !

Leguevin Avant2.jpgLeguevin Apres2.jpg

 

 

francktls
Getting noticed

 

Avant.jpgApres.jpgAnother one, for me cleaning means remove dirty devices 😉 here I removed 1 HP 48P switch with a beautiful stack of 2 MSS225 Meraki switches !

 

 

KrisVerdonck
Here to help

Removed a fortinet + cisco + aerohive disaster and replaced it with the MX84 + MR42 AP's + Cisco SG300.

Cable cleanup and cabinet rearrangement did most of the cosmetical cleanup 😉

 

 

CleanupBeforeandAfter.jpg

 

 

Uberseehandel
Kind of a big deal

@KrisVerdonck

 

Hi

 

Is that the 3M turquoise Ethernet cable that you are using, it looks good as does the other colour with it, pale lavender? 

 

I have to build a small rack from scratch that will be photographed and used in explanations, so it will really have to look the business.

 

The turquoise colour works well with metallic objects - see the Mecedes Petronas F1 car, and your other colour choice is equally suited to a metallic environment.

 

I'd use Aston Martin's AppleTree Green if I could find cables that colour (photographs are unreliable, however)

 

Cheers

Robin St.Clair | Principal, Caithness Analytics | @uberseehandel
KrisVerdonck
Here to help

@Uberseehandel

 

Hi,

 

We used  :

https://www.tridis.be/en/patch-cable-u-utp-category-6-0-15m-violet-utp-snagless

and 

https://www.tridis.be/en/patch-cable-u-utp-category-6-0-15m-green

 

We always use this with a 48-ports switch in combination with 2 x 24 patchpanel around it.

 

See also this one (new rack - no before and after with an MX65).

 

Newinstall.PNG

 

 

Uberseehandel
Kind of a big deal

@KrisVerdonck

 

That looks excellent. Thank you for the URLs for the cables.

 

I have a feeling my photogenic rack is going to end up more expensive than a lot of the kit in it . . .  ;-[])

Robin St.Clair | Principal, Caithness Analytics | @uberseehandel
KrisVerdonck
Here to help

Just for fun another cleanup 🙂

Switches and router are from Cisco but Wifi is Meraki.

 

BeforeBeforeAfterAfter

KrisVerdonck
Here to help

IMG_20160507_143359.jpgIMG_20160508_122926.jpg

Uberseehandel
Kind of a big deal

The wooden box caught my eye . . . 

Robin St.Clair | Principal, Caithness Analytics | @uberseehandel
KrisVerdonck
Here to help

It was handmade to put the rack on top of it but then we found a much better stand between the junk 🙂

 

Uberseehandel
Kind of a big deal


@KrisVerdonckwrote:

It was handmade to put the rack on top of it but then we found a much better stand between the junk 🙂

 


Well the wine was hand made - 

 

winebox.jpg

 

Robin St.Clair | Principal, Caithness Analytics | @uberseehandel
jasonpoort
Conversationalist

Woah, you have your network gear in a bomb shelter?!  Nice! 

anthonymalanio
Conversationalist

Wow, nice!

calebbaker
Here to help

Nice job!

AStoddard
Getting noticed

One of our branch offices went from 60 desks down to a new office with just 9 when the lease was up. Now a little cramped, with the wall rack sitting in the kitchen of the office. Didn't get a picture of it after finalizing the wiring and a little cleanup.

Mid removal of probably 95% of equipmentMid removal of probably 95% of equipment 

Not clean, but not dirty. You can barely see the Nortel switches that would no longer allow us to make changesNot clean, but not dirty. You can barely see the Nortel switches that would no longer allow us to make changes 

The APC units are sitting on top of a refrigeratorThe APC units are sitting on top of a refrigerator

paolo
Here to help

Wow nice work though

X0X0X0
Here to help

Very nice. How is this cooled?

Lindsey
Here to help

"Mr. Slim" cools it, and does a pretty terrible job. This noise is horrendous but I've been told because of budget it is what it is. We did have the AC repair guy out three times and he couldn't fix it. I actually became pretty familiar with the guy, who wanted me to call him when it "made the noise again." So I called him, said "Let me play you the song of my people" and he still couldn't hear it. We then determined that the AC guy might have a hearing loss issue. 

X0X0X0
Here to help

Whoa!
SteveWeidner
Here to help

I love those slim cables!  They really help in cleaning up a rack.

Hoffmaster1224
Here to help

NICE!!!!!

X0X0X0
Here to help

OMG! How long did this take and how many women?

Lindsey
Here to help

This took me, myself, and I a couple months [approvals, third party communications, etc]  If cabling was the only responsibility I had, it wouldn't have taken so long. It still needs work. There are several UPS's in there. 

Gamecock
Conversationalist

Nice work!

redsector
Head in the Cloud

Before: 6 old unstacked Netgear switches:

 

beforebefore

After: 4 MS120-48LP stacked

afterafter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Carlos
Conversationalist

Wow, Is that the same site?

Jhon
Conversationalist

Wow!

MarkGibbens
New here

Good job!

shan
Conversationalist

Wow!

jasonpoort
Conversationalist

Wow.  That's a serious clean up.  Things look WAY better in the after pic.  Nicely done!

Rstevens55
Conversationalist

Looks Great 

 

jgutter
Here to help

NICE I dont see a UPS thou....
X0X0X0
Here to help

Whoa!! VERY NICELY DONE!!!!!