Here is a working site with old and new topology views:


I think the text in the new one is way too small, but otherwise nicer.
If you hover over a link from a Meraki switch then you get more information:

The port information at the top is interesting as it contains the same bug that got the MX port page pulled, the cable actually goes into port 7 on the MX, but CDP/LLDP shows it as port 3, so that is what shows here:

I think the WAN ports are being ignored and then the LAN ports are counting up from 0

If my answer solves your problem please click Accept as Solution so others can benefit from it.