Network Types

Shadius
Building a reputation

Network Types

Hi all,

 

Here's my situation:

 

I currently have a network that is in the "appliance" network type. The network currently consists of an MX250.

 

I will be adding switches and access points to the location.

 

I would like to know how I can accomplish adding the switches and access points to this network so that everything shows up under the same network.

 

Meraki Dashboard Network.png

 

15 REPLIES 15
Inderdeep
Kind of a big deal

Re: Network Types

@Shadius : when you select all networks, you will see all devices until unless you have only one ORG

Inderdeep_0-1623422889504.png

 

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)
ww
Kind of a big deal
Kind of a big deal

Re: Network Types

Claim your order.  Go to the org >inventory. Select a device, and add it to the mx network.

 

If that does not work just create a New network. Then go the org overview page. Select both networks and press combine

 

https://community.meraki.com/t5/Dashboard-Administration/Combining-Network-Types/m-p/116548#M4338

 

 

UCcert
Kind of a big deal

Re: Network Types

As @ww states. Create a new Network, put the new devices in there then merge the required Networks together. Simples

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Shadius
Building a reputation

Re: Network Types

Doing this will not affect the configuration of the MX250 in the appliance network, correct?

UCcert
Kind of a big deal

Re: Network Types

Correct, zero impact.

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Shadius
Building a reputation

Re: Network Types

Thank you all for the assistance!

 

 

Shadius
Building a reputation

Re: Network Types

Neither adding the switches to the MX250 appliance network or creating a new combined network then splitting that same network, then selecting the split networks and the MX250 appliance network and selecting "combine" worked.

 

Here is the message I receive:

 

Cisco Meraki Dashboard - Error.png

 

 

 

 

UCcert
Kind of a big deal

Re: Network Types

Hi @Shadius , amend the Client Tracking method on the Mx then give it another try.  I’ve combined many separate MX networks with new switch and AP networks over the last few weeks with no issues 

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Shadius
Building a reputation

Re: Network Types

@UCcert 

 

Interesting.

 

That worked. Thank you.

Shadius
Building a reputation

Re: Network Types

Will this work the same way when combining switch networks that already have configurations on them?

UCcert
Kind of a big deal

Re: Network Types

Probably just an MX specific issue with the client tracking feature.

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Shadius
Building a reputation

Re: Network Types

When I created a new network, Meraki created a network that had sections for devices that I don't have such as Cellular Gateway & Environmental. Why did it do this and how can I remove those sections from the network?

 

Please see below:

 

Shadius_0-1623710243054.png

 

Shadius
Building a reputation

Re: Network Types

Can anyone shed some light on this?

cmr
Kind of a big deal
Kind of a big deal

Re: Network Types

@Shadius have you ever had any such devices in the organisation?

Shadius
Building a reputation

Re: Network Types

No, never.

 

I'm not sure why the network decided to include those two sections by default when I created it.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.