Hello, I have a Radius Server and lot of MR Access point. Wifi is protected by Radius authentication. All the AP have to be declared on the Radius Server for it to work. How i can declare onfly one IP adresse for all the AP in the same network to simplify the radius configuration ? I have seen some option like NAS ID, caller ID,... Do you have any idea ? Thanks.
... View more
Hello, I would like to do this configuration: I have 2 MX for Wan redundancy, and a CORE STACK with 2 MS. I need a trunk between the MX and MS because MX does inter-vlan routing. How can i connect the stack to the 2 MX without creating a loop, because MX doesn't support aggregate ? Thanks
... View more
ok, i didn't know for the 5G. I took a look to the documentation, you are right. For 4G frequency: Vodaphone use 800,1800,2100 and 2600 Free use 700,1800,2100,2600
... View more
ok, i didn't know for the 5G. I took a look to the documentation, you are right. For 4G frequency: Vodaphone use 800,1800,2100 and 2600 Free use 700,1800,2100,2600
... View more
Hello, Why you don't configure the DHCP server on the Layer 3 switch? It's the best way. I have the same topology, and i have configured the DHCP server on my MS switch. Regards
... View more
Hello, My MX with integrated cellular still in connecting status with Free ISP (French operator). When i try with another SIM Card from another provider (Vodaphone) it works. The Free SIM Card works in a mobile phone. The Free ISP don't use the same frequency than Vodaphone, perhaps it's the clue. Do you have any idea ? Thanks
... View more
For example 2 lan likes this: 192.168.0.0/24 192.168.1.0/24 I have to enable the 2 LAN on the VPN, but i would like to declare only one (to have a better view) How can i summarize to 192.168.0.0/23 ?
... View more
Hello, I have a MX appliance with a lot of small LANs which belong to the same big LAN. In place of enable all the small LAN for the VPN, i would like to use the big LAN, but i can't choose it. Perhaps with a static route. Do you have any idea ? Thanks.
... View more
Hello, In the learning course i find lot of things about MS,MR and MT, but no course about MX, why ? and where i could find them ? Thanks.
... View more
Hi, I made my own MX95 Visio stencil with draw.io. Could you check if it works for you ? link available for 7 days: https://tempfile.io/en/We76VEChcyfFITE/file Thanks
... View more