Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About wsalomon75
Community Record
10
Posts
4
Kudos
0
Solutions
Badges
Jan 16 2024
1:41 PM
Thanks for the response! VLANs are enabled on this Z3. Since you're a Meraki employee, if you could look at my dashboard, it's the EMS_2_Shellpoint Z3.
... View more
Jan 16 2024
1:32 PM
Hello all, I'm trying to turn on some ports on a Z3 that I have connected, but is part of a template. Normally, I would do this through "Addressing/VLANs" and edit the ports, but that's nowhere to be found on this Z3. I'm assuming it has something to do with it being part of a template. Any ideas? Thank you!
... View more
Nov 28 2023
6:37 AM
2 Kudos
I JUST saw this! Thank you!
... View more
Nov 28 2023
6:34 AM
Hello all, I'm upgrading a site's Meraki MX68W to a MX75 because they upgraded their speeds to 500/500, and I want to know if it's possible to easily copy the settings from the site over to the new MX75. Is this possible? I'm new to using Meraki, so any help and explanations would be greatly appreciated. Thank you, William
... View more
Oct 20 2023
6:21 AM
In short, we have a print server located on our network for VLAN 710. We have a number of satellite offices that use the Meraki network, and I need to put a networked printer on a few of them. Without creating VLAN 710 w/ that printer subnet, how can this be accomplished? Just create a dummy subnet on each with the 710 VLAN and tag those ports?
... View more
Oct 19 2023
12:17 PM
Hello all, I'm trying to tag a VLAN on a device plugged into port 3 on the device. I don't want to add the VLAN in the VLAN and Addressing menu, because this VLAN/Subnet will be used among multiple Meraki devices in the future, and it's my understanding that once you add the subnet, that subnet cannot be used in another Meraki device. So I guess my question is, can I easily tag traffic for that VLAN without adding the subnet to the local device?
... View more
Apr 20 2023
7:32 AM
2 Kudos
As it turns out, they didn't need to keep that static IP address at all. Some simple VPN changes and all is well. Thank you all for responding anyway!
... View more
Apr 19 2023
10:08 AM
Hello all, I have two buildings using a MX68, and a user that is moving from one building to another. The issue is, in the first building, he's got static IPs on his equipment, and he needs to retain that IP at the next building. However, those two buildings use different VLANs, hence different subnets. I am unable to add the VLAN from the first building to the second building, and just have those ports use that VLAN as it says there is a conflict. Am I missing something? Is there an easier way of doing this? The vendor is giving a LOT of pushback saying they don't want to change the equipment's static IP to match the new network unless absolutely necessary. Bldg 1: 172.18.41.X Bldg 2: 172.18.46.X
... View more
Jan 31 2023
5:30 AM
This is exactly what it was. Being new to the org and setting up Merakis, I didn't know they had this configured. Thank you for the help!
... View more
Jan 30 2023
1:53 PM
Hello all, I have 8 connected MR46s to a Cisco 9300 on a new floor, with a new config, and after installation, I added the MR46s to our current network of wireless devices. They are showing as connected, took our configs, and when I go to tools and ping out to say, www.google.com they get a response. However, when I go to the floor and stand directly underneath an AP, I'm getting no signal at all, despite showing a green light on the device and the SSID being broadcast. I have checked the power, and it's the same config as the 3rd floor which is working just fine. Any ideas on what to check?
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 405 | |
| 2 | 469 |
© 2024 Cisco Systems, Inc.
