What switch model? ... View more

@Mak ,   I think there might be a bug when creating  a new secured VLAN. For me I did the following and got the same result that you did.    1. Created a new wired VLAN enabling the secure network feature and DHCP server. 2. Created a new SSID. 3. Connect my laptop to the new SSID and attempted to pin across the VLANs.   To verify my work I went to settings / Local Network Addressing / "Select the VLAN" / Edit / Configure VLAN. It was here that I saw that the  Secure this network option was still disabled. Once I enabled the option and waited 2 minutes I was no longer able to cross VLANs. ... View more

Well deserved @RaphaelL (and of course everybody else). Simply gotta love those stellar contributions! ... View more

Thanks for sharing the info. I will try the Netgear MS510TXUP but I know it will not be controllable in Meraki Go app ... View more

page 5 of the manual shows lan  and wan ports.   is your vr1600 connected to the internet via an ethernet canle from 1600v wan port to service provide modem?   the FW would go between isp modem and vr1600.         I dont see an rj45 on the vr1600v on pag 5.  ... View more

have you   select see all ports   go to setings   pick the selction > to the right of the intended port   when you get to port information, select settings at the upper right   select the slider to enable the port   select save     ... View more

Mak,   I don't think the M-Go product supports being a Radius server at this time, but that is a feature I am sure you could request for future development. I am  also including a link to the support documentation to help with some of the questions    https://documentation.meraki.com/Go ... View more

Assuming the Orbi isn't doing 802.1Q, and you only want VLAN4 on Port 5.  Looking at your last two screenshots, you want:   - Port 4, VLAN1 untagged, VLAN4 tagged, because the port this is coming over on from the firewall, which should have 1 untagged, 4 tagged.    - Port 5, VLAN4 untagged, and only that VLAN allowed on the port (currently, you have 1 untagged on that port, 4 tagged). ... View more

App or Portal / Network / Select the network / Device Hostname or MAC address   It may help you at minimum to do a reserved IP, but for me I statically assign my infrastructure to avoid these types of issues. Another pro-tip is to create a management VLAN if you haven't done so already.  ... View more

Hi, yes it is what I was after. Thanks very much for the help.   Cheers! ... View more