Meraki

Shoichi · ‎Jun 26 2023

Thanks for the quick response! Well, 802.11 Deauth Reason Codes you listed looks the one. However, is it documented that the reason codes in the syslog can be referred to 802.11 Deauth Reason Codes ?

Madhan_kumar_G · ‎Jun 26 2023

Hi, Welcome.

syberinfo · ‎Jun 25 2023

Welcome to the community @AC95

PhilipDAth · ‎Jun 25 2023

Have you got the SSID set to be hidden? If so, make it visible and the issue should go away.

newnovice · ‎Jun 25 2023

Hi @alemabrahao, Could you specify how to downgrade the version? Since we got first version 18.107.2, there is no rollback option in dashboard. Must it be done through Meraki Support? Thanks.

Madhan_kumar_G · ‎Jun 24 2023

Hi, Following is similar conversation for your reference https://community.meraki.com/t5/Security-SD-WAN/3-ISP-on-Meraki-MX84/m-p/72164

kev2five · ‎Jun 22 2023

Hi All, its due to using a Template. If I go into the template I can see the option. BUT, i don't want to apply this change to all my networks. So i'm asking support how I can target each switch across all my networks to receive the change in priority only. I have a suspicion i'll have to unassign from the template.

JonH1 · ‎Jun 22 2023

Top work guys, all working, I couldn't wait till tomorrow and the mrs is watching sex in the city!

PhilipDAth · ‎Jun 22 2023

No. As you have correctly noted, Twilio does not have good international delivery. I live in New Zealand, and I don't think Twilio can do TXT delivery to any country in this quarter of the planet, maybe this half of the planet. Typically I would only use Twilio for customers 100% US based. Twilio seems to work fine in that one market (as long as you ignore roaming users). I think you would be better off looking for a solution that doesn't use TXT, but either way, I think you are going to need to look for a commercial solution, such as Splash Access: https://www.splashaccess.com/

BlakeRichardson · ‎Jun 22 2023

Nice one @Bandwiches and congratulations on your first child.

Madhan_kumar_G · ‎Jun 22 2023

Hi, Please provide if you find any errors or logs to help here.

Pmeza · ‎Jun 22 2023

As an update to this thread, I updated the code to pull data at the 55th second mark and now it pulls whatever was reported within that minute instead of showing status from 2 different minutes. Example showing only what was reported within a specific minute mark. Thanks everyone for your help!

cta102 · ‎Jun 21 2023

You seem to be getting your self mixed up with Python lists and passing values directly Try update=dashboard.wireless.updateNetworkWirelessSsid(targetNet, 0, name='Test SSID', enabled=True, encryptionMode= 'wpa', wpaEncryptionMode= 'WPA2 only',psk= 'NewPassword!')

Madhan_kumar_G · ‎Jun 21 2023

Hi, Navigate to Security & SD-WAN > Configure > Content filtering Remove the asterisk symbol " * " from the "Blocked URL Patterns"

Madhan_kumar_G · ‎Jun 21 2023

Hi, If you are integrating 9300 for Meraki Monitoring only, There is no impact on the switch functionality over DNA license expiry. But if you convert it for Management, it becomes a MS390 and requires Meraki License to function. DNA Licenses you purchased in case, can be migrated to Meraki License with the help of the Accounts team and TAC.

ianjericho · ‎Jun 21 2023

@Madhan_kumar_G it is managed app. Thus I was wondering why I can't remove it via MDM.

cta102 · ‎Jun 21 2023

Unfortunately that has the same issue as updateDeviceApplianceUplinksSettings I will probably dig into meraki.py at when I get time to see if both WAN ports have to be written with the PUT request or if I can add an extra function which allows better targeting of WAN updates Thanks for taking the time though BTW in the V1 method you can specify a single WAN port, but it still updates both

cmr · ‎Jun 21 2023

We use the single ended core design as we have multiple internet and MPLS connections (four in total) that the SD-WAN connections run over. You cannot do this in routed mode as there are only two WAN ports usable at a time with the current firmware.

Madhan_kumar_G · ‎Jun 20 2023

Hi, We have used Ambassador account to maintain guests. Procedure as in below link, In page 15, you can generate the random password for the guests. https://drive.google.com/file/d/14hG4XWb7EXrh3xSVmMI2KTmzsaN42iLa/view?usp=sharing

BlakeRichardson · ‎Jun 20 2023

Good to know my thoughts match what has been said. Yes this discussion was only about switches. AP's are on a strict 4 year replacement cycle.

PhilipDAth · ‎Jun 20 2023

Do you have a firewall? If so, could you ensure it allows all the traffic specified in the Help/Firewall info page.

Tom7021 · ‎Jun 20 2023

Literally saw that after posting this, why are the simple things always the hardest! Thank you 🙂

NetQloud · ‎Jun 20 2023

OK, that does not sound very logical, but some things aren't. We use tag's with a unique number as the distinctive item on every device, easy to recognize for every end-user. We don't want to search for Mac-adresses or serial number in a patch cabinet.

Madhan_kumar_G · ‎Jun 20 2023

I am glad to hear that 🙂

Madhan_kumar_G · ‎Jun 20 2023

Hi, Connecting Laptop to a LAN port of the MX, and configuring under http://setup.meraki.com makes things faster.(You do not have to be connected to the Internet to reach this address). The default credentials use the device serial number as the username, with a blank password field.

About Madhan_kumar_G

Madhan_kumar_G

Community Record

Badges