I've scheduled this for 2am tomorrow. Apparently Netflix at the moment is critical !   I do wonder if the issues affecting MX84 will ever be fixed. They seem to have been around for a while now.    Still waiting for AnyConnect Beta 😀 ... View more

That's excellent. We were just testing deployment of FreeRadius but not that easy to manage outside of our own business (eg for our clients). I'm glad we haven't spent too much time on this!   Do we need to contact Support to have anything enabled in our Dashboard, or will this become available automatically?   Thanks, Chris ... View more

We have deployed several sites where the MX sits behind the BT modem/router. We plug the WAN port of the MX into one of the LAN ports on the BT router, and then set the MX IP to be in the DMZ and set this to a fixed assignment. Both Site-to-Site and Client VPN work. ... View more

Have you put the MX IP in the DMZ on the D-Link router? ... View more

Excellent.    Is there any more information on "Identity PSK w/o RADIUS"?   Looks like there has been a website refresh as well, looks great.  ... View more

When you choose the organisation, the network list appears in the menu as well. It’s a swipe gesture to choose (see the two dots at the bottom).   Not so obvious, but once you know... you know 🙂 ... View more

I'm installing 26.8 now to see if this resolves the problem.  ... View more

Version 26.8 now available to upgrade.    Looks like it's also the initial stable firmware for some unreleased access points too ... unless I've missed a webinar. ... View more

Excellent!   Installing now 😀 ... View more

I've had a similar problem for a client.  We have put in a full stack at both his delis and loves the dashboard (albeit read only). All the till guys said that a site-to-site VPN would never work (to link the pricing etc between the venues) -but it did just work!   We wanted to put in an MX and also MS/MR into his house so that he could update the tills without the need for RDP and generally improve his home network. The problem was he has 1Gbps up and down at home and laughed when I said it was only the MX250 that could supply the speed. Even suggested perhaps MX100. No idea why he needs 1Gbps, but that's another story.    We have ended up ordering a Z3 for him at home and the desktop used for RDP will simply be plugged into that and used to connect to the two sites. The downside for us (and Meraki) is that we could have another full stack order.  ... View more

Hi,    When you switched to the MR45, did you choose the same SSID and PSK?   I have also found that for certain hardware (Nest Protect, Ring Camera), I had to white list the clients on the dashboard for them to work.    Chris ... View more

We are on 26.7, so it looks like an issue across multiple firmware versions.  ... View more

I have the same problem on my network (raised here).   A little frustrating, I've had to reset the network settings on my iPhone to fix it short term.   Which firmware are you on?         ... View more

This morning, iPhone now says incorrect password and won't even join.    No configuration changes have been made at all.   Worth raising a case with Meraki support to have it logged? ... View more

I used to have one of mine set to: GCHQ Mobile Monitoring Station   Now, my private SSID is 2 fly for wifi and my public/guest wifi is set to my wifi is better than yours ... View more

Hello,    I have Sky Q integrated into a full stack Meraki setup. I have 1 main box and 2 mini boxes.    Unfortunately you will not get this to work over WiFi if you have a mini box. I was able to successfully set the boxes to turn off their broadcast SSID and connect to my MR52s. The problem (as I understand it), is that the traffic from the main box to the mini boxes is still transmitted over its own mesh and not over the WiFi connected to the APs. Very frustrating when I have such a robust WiFi set up.    I had to set everything wired, and it does work flawlessly. I have a number of switches between the boxes and the MX. In order to get the iPads etc to stream, I had to set the following on the switches:     Hope this helps.    Chris   ... View more

Both APs are MR52 and latest firmware (26.7)   I do notice that sometimes my iPhone is on 4G and then switches back to wifi, is that an issue probably not.    I do have wifi calling set up and sometimes notice if I roam between the APs the signal degrades quite a lot (normal phone signal is pretty weak).    I do have 802.11r set to Adaptive (and just PSK WPA2). I do understand the security issue and hence moving to iPSK. ... View more

Hi,    There is an API you can use. To get started: https://documentation.meraki.com/zGeneral_Administration/Other_Topics/The_Cisco_Meraki_Dashboard_API   Lots of help and resources can be found here: https://developer.cisco.com/meraki/   Chris ... View more

I would buy one of these!   Currently I attend *some* meetings with a "don't blame the network" t-shirt... ... View more

Is there a firewall rule preventing the VPN subnet from accessing the network shares? ... View more

Mine was quite quick for the replacement (probably about a year ago now).    They also gave me over a month to swap the device out, which was helpful because I had to coordinate this with the data centre staff (we didn't do the swap).  ... View more

I would be asking your sales rep why he didn't know that... 🙂 ... View more

I've had the same, a couple networks have suggested moving to 26.6.1.    I've upgraded our office to this version. I wonder if this is for an undisclosed security issue? ... View more