Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About npnitin
Community Record
14
Posts
3
Kudos
1
Solution
Badges
Feb 12 2024
1:39 AM
Please go through the below document as well https://documentation.meraki.com/General_Administration/Licensing/Meraki_Per-Device_Licensing_Overview/Meraki_Per-Device_Licensing_-_Configuration
... View more
Sep 21 2023
11:59 PM
Hello Expert, How I replicate below configuration (Cisco) in Meraki switches? authentication control-direction in authentication event server dead action reinitialize vlan '------' authentication event server dead action authorize voice authentication event server alive action reinitialize authentication host-mode multi-auth authentication port-control auto authentication periodic authentication timer reauthenticate 43200 authentication timer restart 3600 authentication violation restrict mab mls qos trust dscp dot1x pae authenticator dot1x timeout quiet-period 600 dot1x timeout server-timeout 40 dot1x timeout tx-period 2
... View more
Labels:
- Labels:
-
Interfaces
-
Layer 2
-
Layer 3
Sep 21 2023
11:55 PM
After enabling Local page status, the VAPT software is able to scan the devices.
... View more
Sep 4 2023
5:18 AM
As per the VAPT team, they are using two methods 1st is using credentials and accessing the devices via SSH and 2nd method is without credentials. they need the mgmt IP of that device only. It works on other OEM switches but not on Meraki.
... View more
Sep 4 2023
4:59 AM
Hello Experts, My company conducted VAPT for network devices including Cisco, HP and Meraki devices. For Cisco and HP, VAPT tool generate the report successfully but for Meraki switches it not able to generate the report. And Meraki switches able ping that VAPT server. And VAPT is not using any credentials for this testing.
... View more
Jun 18 2022
2:58 AM
Dear Experts, We have deployed two MS425 switches as CORE and MS125 as Access switches. In the client section, we have seen each client seems two times means the same client shows on the Access and Core switch. So, please assist me to understand why this happens.
... View more
May 5 2022
6:07 AM
we are using MR 76 AP in our environment. We are facing the below issue: IoT devices connected to AP for less than 1 min then move to another AP and stay there for 1 min after that disconnect and then connect to the other AP. AP to AP distance in 12-17 meter. Please assist me in this regard
... View more
Labels:
- Labels:
-
Interference
Apr 22 2022
10:15 PM
3 Kudos
Earlier we have use a analog sensors for measuring temperature and humidity in Foundry. Which some time showing wrong result due to that processing material would be futile. Then we have shifted to Cisco Industrial Asset Vision Sensors like AV201 and Cisco IXM gateway. Now we got a real time data of temperature and humidity through the dashboard which resulted in increasing productivity.
... View more
Yes, you are correct. AP connected to MS120 switch. Now I am Off shift but I will be able to access the device tomorrow at 11.00 AM(IST). But why does this issue occur?
... View more
How do I send you a serial number? If I share SN here then everyone can see
... View more
Hello Expert, In my new deployment, I register my switches(MS) successfully and then connect AP to the switch. AP getting an IP address from the DHCP server which I see on the switch ARP table. and I ping AP from my all switches but when I ping from AP where ping failed. Also AP not register on Meraki Portal Please assist me in this challenge
... View more
Labels:
- Labels:
-
Installation
-
SSID
Dec 2 2021
5:26 AM
Thanks for your reply. I want to give some details of my ongoing deployment. We use one subnet for all wired and wireless networks so all users including IoT are in one subnet. All IoT devices use only a wireless network and other users connected on the wire. So please advise, how can I implement these policies?
... View more
Dec 1 2021
10:27 PM
Hi Experts, I want to use MAC filtering to access the wireless network. But I don't have a RADIUS server. Most of the devices are IoT based So, please guide me on this matter. In this case, I will be installing MR76
... View more
Labels:
- Labels:
-
Installation
-
SSID
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 390 | Feb 12 2024 1:39 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 3 | 11153 |
© 2024 Cisco Systems, Inc.
