There have not been any changes since the previous thread you saw. This is still not possible through a native solution. You could potentially have something like Chrome launch on login and have the homepage set to a specific video wall, but there is a also a global Dashboard forced logout setting which may eventually kick this out.  ... View more

@Ben See here: https://documentation.meraki.com/MR/Other_Topics/Integrating_Cisco_Umbrella_with_Meraki_MR_Networks   "Please contact Meraki Support to have this feature enabled." ... View more

What's the name of the profile this is coming from? Is it the Meraki enrollment profile?  ... View more

I have 25.12 running on ~1,400 AP's and so far have not had any complaints of random disconnects. This is only the second day with teachers back in the district however. Hopefully it's really fixed.  ... View more

Ask the engineer assigned to check with the SM dev team. They have the ability to do this easily so it shouldn't be a problem.  ... View more

@Adam You can use this in place of the NAT mode content filtering. Another big benefit is the AP's enforcing the DNS traffic going to Umbrella and encrypting that traffic. Even if someone configures alternate DNS servers locally, it won't matter as the AP is going to send it all to Umbrella.  ... View more

This seems like a bug since valicert.com doesn't have a valid cert. It is a very old root CA that (I think) GoDaddy purchased at one point, but it's not used anymore. Perhaps @Melissa can check with the engineering team on this.  ... View more

It sounds like this may be an issue with the specific network/SSID that was removed. Do you have a case open with Support on this? You may need to get SM engineering involved to have it removed.  ... View more

For your first issue, are you 100% positive this old SSID is not still configured anywhere in your Dashboard org? Typically the old Meraki WiFi profile should be removed when the old SSID is removed or changed to a non-Sentry auth type.    I'd love to hear feedback from the SM team on your other questions as I also see the same (odd) behavior.  ... View more

Meraki doesn't disclose roadmap info, so...  ... View more

@RBederian It should, yes. Give it a test and if you still have issues, ask Support to disable CCX completely.  ... View more

@RBederian Give 25.12 a try.  ... View more

The MX84 is rated for 500Mb. Take a look at the MX sizing guide here: https://meraki.cisco.com/lib/pdf/meraki_whitepaper_mx_sizing_guide.pdf ... View more

Last summer I was (unfortunately) one of the first, if not the first, customers to identify the original fan issue with the 225 series. We had placed a large order of them and had about 2/3rd of them in production when we hit almost 50% failure rate. We ended up replacing the entire batch of them.    It will be very frustrating if the batch we just put in production this summer has similar issues and will need replaced. One would think a single blower fan wouldn't be incredibly hard to engineer correctly in 2018.  ... View more

This is the only specialized ceiling mount kit Meraki sells: MA-MNT-CLG-1   While this includes adapters for "recessed" t-rails, it doesn't sound like this will work for your application.  ... View more

I'll update this thread when I hear back from the MR team.  ... View more

We are sticking with 25.3 as the issue is still present in 25.11. The last time I spoke to the MR team they had identified what was likely causing the issue but did not have updated firmware ready.  ... View more

UK only for now - https://community.meraki.com/t5/Announcements/Meraki-Go-is-LIVE/ba-p/23163   The two AP's (which I think are equivalent to the MR20 & MR70) have been certified by the FCC in the US, so I suspect this will eventually be available in the US as well.  ... View more

This is an awesome achievement! Thanks to @CarolineS for all of your hard work guiding the community to where it is today. Here's to the next 10k! 🚀 ... View more

@DrFiber Do you still have 425's that need to be upgraded, or have all of them been upgraded and/or replaced at this point?  ... View more

@DrFiber I have not had the issues you're seeing with 425's when upgrading from 9.X to 10.X firmware and all of my 425's are stacked. The downstream switches from the 425's are even 225's like yours with LACP uplinks to the 425's.    The only thing I can think of is if you are scheduling the upgrades to happen all at the same time, or if you are staging them for the 225's first and then 425's. I schedule all of the 225's to go at least 1 hour prior to the 425's so they are all complete prior to the 425's going down.  ... View more

@Christian87 See my post here: https://community.meraki.com/t5/Security-SD-WAN/vMX100-Azure-Cloud/m-p/12205/highlight/true#M2969   You cannot remove the lock on the resource group the vMX is deployed in. Because of this, you need to place the vnet in another RG. Nothing should be in the RG with the vMX as it will be locked during the deployment. You'll need to redeploy the vMX to correct this.  ... View more

@DanStewart Update to my earlier comment about lack of t-rail mounts: we successfully deployed well over 200 MV12’s that are mounted directly to ceiling tiles. We used the included drywall mounting screws that come with the cameras. We originally were very concerned about this but now having gone through the deployment it’s a non-issue.    We also mounted to 4x4 boxes by using a blank cover plate and screwing the mount onto the plate. Worked fine for the cameras that were wall mounted and it looks very clean.    We’ll be interested to see what @GeorgeB & team come up with as official solutions.  ... View more

The stacking ports in the rear (it's not clear to me what you mean by "uplink" ports) cannot be used as regular access ports. These are only for use with stacking.  ... View more