I feared as much, I have a lot of device configured 9300s on 17.15.4 and thought perhaps I'd missed an in place upgrade somehow.   Hopefully it's coming soon! ... View more

You can find the Network Wide Smart Profiles under Switches --> Port Profiles. Especially when none where created before. Afterwards you can change them Globally also.  The Global Smartports you can access via Organization --> Smartports   ... View more

Congratulations @JeroenVercoulen @AxL1971 @MarcP  ... View more

Meraki offers the Campus Gateway as the intermediate solution for locations with a lot of AP's This makes sure roaming is also handled locally.  ... View more

Personally, I would configure per-user and SSID bandwidth limits on the Guest SSID on the MRs, and not on the MX.  It won't be perfect, but MUCH easier to manage. https://documentation.meraki.com/Wireless/Operate_and_Maintain/How_Tos/Firewall_and_Traffic_Shaping/Configuring_Bandwidth_Limitations_and_Enabling_Speed_Burst_on_Wireless_Networks     For example, let's say you have a 100Mb/s connection.  Limit the guest Wi-Fi to a total of 50 MB/s of bandwidth, and apply a per-user limit of 10 MB/s.       ... View more

It's good to see this feature in the dashboard. Is the ability to set variables only available through the Beta programme? Should they not at least pull the 'generalised region' values from https://www.electricitymaps.com/? Silly question, but where do you request to be added to the Beta? ... View more

I hade the same a few years back with Catalyst switches. The solution there was to use the switchport voice vlan command and set it to the same vlan as the access vlan. Then it worked.   Wen you run CS17.15.4 or higher upu essentially run a catalyst switch and the switchport voice vlan is added for voice vlan config.     ... View more

unfortunately it doesn't block anything for this. ... View more

There are no "per API call" specific limits.  The limits apply to the API as a whole. All of the limits are documented in the link I provided. ... View more

I see the logs on Meraki being flooded by the following message. Does anybody experience the same?   Switch 1 R0/0: linux_iosd-image: Number of IPC messages held in the application reached the maximum channel threshold. IPC channel 'ngwc fed bipc': ipc_ctl_id 49 (ipc_fd 132, seq_num 210), curr IPC msg hel in appl 49415 ... View more

aaa new-model aaa group server tacacs+ GROUP_TAC server name TAC-AUTH1 server name TAC-AUTH2 aaa authentication login default local group GROUP_TAC aaa authentication login MERAKI local aaa authentication enable default enable group GROUP_TAC aaa authorization config-commands aaa authorization exec default local group GROUP_TAC if-authenticated aaa authorization exec MERAKI local aaa authorization commands 15 default group GROUP_TAC if-authenticated aaa authorization commands 15 MERAKI local aaa accounting update periodic 3 aaa accounting commands 15 default start-stop group tacacs+ aaa session-id common ... View more

Hi team, our RADSec implementation only supports TLS. There is no DTLS support. ... View more

I tried again and the switch port disconnects when the cable test is run...   But at least the MR56 reconnected at 5Gbps this time! ... View more

@JeroenVercoulen    But OSPF on the LAN side is enabled only if MX is in routed mode, right? Can AutoVPN subnets be advertised over LAN port if MX is in concentrator mode? ... View more

We can't conclude the timing , some times 10 hours and some time 1 day 2 days. ... View more

Have a read over the uplink monitoring for failover. https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Connection_Monitoring_for_WAN_Failover   ... View more

From the 17.15.3 version there is a new way of management called Hybrid Mode. This is also a configuration change on the switch it self. With that you gain additional features in the dashboard.   https://documentation.meraki.com/MS/Cloud-Native_IOS_XE/Upgrading_Cloud-Monitored_Switches_to_Hybrid_Operating_Mode   Probably that is the reason you can't upgrade directly, because it requires an change in Management. The bug you speak of was in the with the Cloud-Native IOSXE version for the MS390, C9300(X) and C9200L versions for management in the Meraki Dashboard. ... View more

I noticed the documentation page was updated very recently to include the `ip routing` command.   Edit: Linked specific documentation. ... View more

I'm already running several locations on this new firmware. I would say this looks good, also for the MS390 switches. You finally have an console for show commands. ... View more

@cmr it Also depends on what functions you need from the Meraki Dashboard on the switch. If the CS firmware supports is and the IOS-XE not you shouldn't upgrade. Otherwise I see in my opinion no reason to not upgrade. ... View more

The switch was apparently not happy with my IPv6 config. "Router FE80::AA46:9DFF:FEB6:2137 on Vlan10 conflicting ND setting prefix somethinsomething::/64 valid lifetime, difference 2586600 seconds" I have no idea what this means 🙂 ... View more

Hi @JeroenVercoulen , Yes I did. Any particular part you are interested in? ... View more

Long allowed Vlan statements (over ~39 characters) has now been fixed, but the maximum character limit is still ~240. Please also note if your device is not upgrading and stuck at saying 'Not running configured version', make sure that the 'Local device status pages' (Under Network>General Device Configuration) is enabled. I was advised on this by Meraki, good spot to the engineer who figured that one out. ... View more