Hi @JMI,   I have good experience using the methods provided by Meraki portal, but I used to use billing or social login. ... View more

@NorthstarCC,   I'm not sure, what are you trying to do? But have you tried to create Reserved IP ranges? Can you explain it better?     ... View more

Hi @Anbarasan,   Check this link:   https://github.com/wifiguru10/Meraki_MX_Converter ... View more

If they're in different organizations, yes, but particularly I've never tried to establish a Non-Meraki VPN between two MXes, I don't know if that would work. ... View more

Well, I'm not sure. If it's just for a Lab I think you can try. ... View more

Does the switch core has a route for this network? Do you have a topology? ... View more

In time, does your client use any CMX functionality in particular? ... View more

Well, I know that it is possible to use Cisco ISE with Meraki APs without problems, But I'm not sure about CMX, because Meraki has a Location Analytics integrated.   https://community.cisco.com/t5/security-knowledge-base/how-to-integrate-meraki-networks-with-ise/ta-p/3618650 ... View more

Hi @ishh,   Well, I have a client with 700+ branches, and the MXes are working fine. It's a little strange.  ... View more

@FKastro,    Is it possible to change it to WPA2 only and disable 802.11w? Just to test. You can also create a new SSID to test It. ... View more

I got It, can you share your RF Profile configuration? What type of authentication are you using? ... View more

@FKastro, have you facing the same issue using 5Ghz band? ... View more

Hi @ishh,   Have you tried to create an SD-WAN policy and Traffic shaping rule?   Take a look on this link: https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MX_Security_and_SD-WAN/Meraki_SD-WAN#NAT_Traversal_2 ... View more

@KBLatColonial look at this article:   https://documentation.meraki.com/MR/Encryption_and_Authentication/External_Identity_Sources ... View more

Do you have a radius server installed? If yes, you can create a policy and specify what group can log in on a specific Wlan.   https://blog.matrixpost.net/set-up-a-radius-server-on-windows-server-2019-for-802-1x-wireless-connections/ ... View more

Happy birthday Meraki Community! ... View more

@DGME Could you please give more details? ... View more

Check this post:   https://community.meraki.com/t5/Meraki-Service-Notices/Dashboard-issues-affecting-device-status-and-live-tools/ba-p/147712 ... View more

What are the MXes model and version?    Security appliance firmware versions MX 16.16.1 changelog Important notice While Meraki appliances have traditionally relied on UDP port 7351 for cloud communication and TCP ports 80 and 443 for backup communications, with MX 16 we are beginning a transition to using TCP port 443 as the primary means for cloud connectivity. In order to ensure proper connectivity to the Meraki cloud after this upgrade, please ensure that traffic using TCP port 443 between 209.206.48.0/20 is allowed through any firewalls that may be deployed upstream of your Meraki appliances. HTTP proxy, which allows default management traffic from MX appliances to be sent through a proxy, is deprecated on MX 16 and higher firmware versions. ... View more

@FlyingFrames  Usually when there is a problem on the dashboard they send an email informing about the problem and also informing us not to worry that the client's network will continue to work normally. But I'm not sure if there is documentation with this information. ... View more

I am unaware of this situation, once the L2TP connection is configured it should remain unchanged. ... View more