You need a SD-WAN Plus license.   SD-WAN Internet Policies (SD-Internet) - Cisco Meraki Documentation ... View more

Take a look at flow preferences.     SD-WAN and Traffic Shaping - Cisco Meraki Documentation ... View more

Another suggestion would be to use templates, which would allow you to change settings simultaneously. This would be more efficient than using APIs.   https://documentation.meraki.com/General_Administration/Templates_and_Config_Sync/Managing_Multiple_Networks_with_Configuration_Templates ... View more

I'm sorry, maybe I missed it, but I also suggested contacting support. 😉 ... View more

You can use configuration sync.   https://documentation.meraki.com/General_Administration/Organizations_and_Networks/Cloning_Networks_and_Organizations_in_Dashboard#Cloning_Network_Settings_with_Configuration_Sync     ... View more

Hi, how are you? Did you have a chance to check out what I suggested? 😊 ... View more

If the MX received BPDUs on the LAN, these BPDUs will be re-forwarded within the broadcast domain that they were received on. If there are multiple switches connected to the LAN of the MX participating in an STP election, all BPDUs sent to the MX will be forwarded to other links with the same VLAN allowed, which can cause switches to see BPDUs from multiple other switches, causing ports to get into an unknown/unidentifiable state and impacting the root bridge election process.   Below is a diagram illustrating how the STP election process can be affected by this MX LAN forwarding behavior - when 3+ switches are connected in the same broadcast domain, each switch will receive BPDUs from 2 or more switches on their connected uplinks. In the case of switches 2 and 3, the uplink is both a root port and a designated port from the switches' perspectives, causing the ports to go into an unknown state. In practice, this can also result in rapid STP port status changes for uplinks on multiple switches.       https://documentation.meraki.com/MX/Networks_and_Routing/MX_Layer_2_Functionality#Spanning_Tree_Protocol_(STP) ... View more

Have you already opened a support case? ... View more

Maybe with this API.   https://developer.cisco.com/meraki/api-v1/get-organization-licenses-overview/   However, as far as I know, there is no official API for this. The official document doesn't mention any API.   Meraki Free Trials - Cisco Meraki Documentation ... View more

I'm saying this because I'm taking into account that the TACACS servers aren't being defined in the example configuration. However, if you'd like, you can share your configuration so I can check if anything is missing in your TACACS configuration. 😄   ... View more

I suggest you open a support case. ... View more

Take a look at this document to.   https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_FAQs ... View more

I don't think you understood me. I wasn't calling you ignorant, I was calling myself ignorant.  😅 But I believe the documentation implies that it must be a local user. ... View more

The network will stop to work.   Post-Trial Why is the trial still in my Organization when it is expired? A trial will automatically be removed from your network 30 days after the trial has ended. Make sure to you either have contacted your Sales Rep to buy the trial or have gone through the process to return it. If your trial is a customer-generated SM trial then it will disappear within 30 days after the trial expires. Why is my trial device missing from my organization? Please note that expired trial devices may be removed from a customer's network after 30 days. If you cannot re-claim your trial device, please reach out to your Meraki Sales Rep to either purchase or extend your trial gear.     ... View more

Excuse my ignorance, but what difference does it make whether you use a local account or a TACACS account?   This account is only used for onboarding, so in my opinion, it makes no difference. ... View more

Take a look at this.   https://documentation.meraki.com/MS/Cloud_Management_with_IOS_XE/Hybrid_Operating_Mode_Switches_Configuration ... View more

Here is all the details that you have to know.     https://documentation.meraki.com/Cloud_Monitoring_for_Catalyst/Onboarding/Cloud_Monitoring_for_Catalyst_Onboarding_Guide ... View more

 I don't think it will be possible and you will have to have another switch between them like an MS425. ... View more

@Del_B  I think you should accept @PhilipDAth's answer as the solution. ... View more

And will this really work? It seems like a hack. 🤣 ... View more

If they're in a template, you can't update the password individually, but you can update it through the template. To update each one individually, you'd have to remove them from the template. ... View more

Unfortunately, Entra ID splash page authentication does not support dynamic VLAN assignment based on user group or attributes.   If you want to retain dynamic VLAN assignment based on Entra ID groups, you’ll need to use Meraki Access Manager with EAP-TTLS/PAP or EAP-TLS authentication.   Microsoft Entra ID Integration with Splash Page - Cisco Meraki Documentation   Access Manager Username/Password Authentication - EAP-TTLS/PAP with Entra ID Lookup - Cisco Meraki Documentation ... View more