Meraki

OBARRERA · ‎Mar 8 2022

Looks like I'm in troubles. Thanks Paul 🙂

OBARRERA · ‎Mar 8 2022

Hi Everyone, I think I made a mistake, I added a license for an MX and then changed my licensing to per device. How can I go back to co-termination licensing? In my network I have AP's and my MX but I cannot assign the licenses to my AP's 😧 HELP!

OBARRERA · ‎Oct 28 2021

And Meraki support can enable it fron the backend? 😞

OBARRERA · ‎Oct 28 2021

Hi felow companions. Can I enable a third wan port on a MX 250? HEEELP!

OBARRERA · ‎Sep 13 2021

Now you can do it in Network -> General -> Meshing. You can turning on or off.

OBARRERA · ‎Jul 31 2021

Hi WW, I already read that document, if I understand it well that only works if the server is in the same network but in other VLAN, isn't it? My server is in a complete diferent network.

OBARRERA · ‎Jul 31 2021

Hi everyone! I have a problem in a configuration with a external DHCP Server. That server is in another network with the IP 192.168.143.X In the VLAN I desable the DHCP service but I don't know how I can configurate the meraki so that VLAN catch the other DHCP. I hope someone can help me 😞

OBARRERA · ‎Jun 29 2021

Hi everyone, I need your help with a question We have a network like the one in the attached image. Above our meraki they put a fortigate that gives DHCP and does group policies, web filtering, etc. That fortigate also does the site-to-site VPN with other branches, but they don't want to free up other ports or create vlans to communicate between the different segments we have, so that's what Meraki will do. My question is, if we connect that fortigate to the Meraki WAN port, can that port do the NAT to the Meraki LAN network? That is, Meraki from its WAN port does the NAT between the 2 networks. Is this possible to do? I realy hope you can help me 🙂

OBARRERA · ‎May 20 2021

I'm too young for this? My first network was just 2 years ago. I connect all the branches to the main office with Meraki and traditional Cisco. All the MX are connected by a VPN Site-to-Site and the WLC is in the central office and gives the SSID for all the branch offices.. The domain server is also connected to the MX for users using the VPN. I think I missed those good old days when everything was by console. I just did all this on the dashboard.

OBARRERA · ‎Jun 4 2020

How can I remove the User field and just ask me for the password on my splash page. I want the user to be by default "admin" for example and that my users only enter a password. Is it possible to do it with some option in my MX or should I do it from a custom splash page at code level?

OBARRERA · ‎Jun 4 2020

I know, my doubt was that if the configuration I made to connect my MX to my Radius server had to be validated by Meraki before being approved and that the status was OK. I just rebooted my MX to make it OK. Thanks for your comment. 😄

OBARRERA · ‎Jun 3 2020

How long does it take for the meraki cloud to authenticate a radius server? I configured my radius server in the access control of meraki but it does not give me OK. All settings are correct. Is there any time when meraki reviews this information to give the go-ahead? Regards, Oscar.

Meraki

Community

About OBARRERA

OBARRERA

Community Record

Badges

Re: Per-device to Co-term

Per-device to Co-term

Re: Third WAN

Third WAN

Re: Disable MR auto mesh function

Re: Get DHCP from another server for a vlan

Get DHCP from another server for a vlan

NAT between a WAN port and a LAN port.

Re: Share your nostalgic networking stories. Win swag!

Splash Page

Re: Radius Server

Radius Server

Re: Disable MR auto mesh function

Re: Disable MR auto mesh function

Re: Share your nostalgic networking stories. Win swag!