smart lights, use refurbished devices, smart building etc. ... View more

yeah, i did it, thanks ... View more

The new 17.10.9 patch might fix this for you:   New MX 17.10.9 stable firmware release - IDS/IPS CPU utilization fix! (and ... - The Meraki Community ... View more

We need this also. Having to download logs a page at a time and then collating all of them is painful. ... View more

congrats to the judges ... View more

Interesting! Please have a look at my post related to L3 outbound rules. ... View more

Thank you again kNeil.  These are the kinds of specifics I was looking for. ... View more

Since our content filtering is currently provided by a third-party, sometimes definitions may change without our knowledge or control. As others have pointed out, as of 17.x firmware, definitions will be provided more internally from TALOS.   In the mean time, if it's not possible to add those domains to your permit lists in content filtering, and you have reason to suspect a domain was misclassified, please open up a Support case. We have a contact form with Brightcloud we can use to report misclassifications to them, and get those domains corrected. ... View more

@MarcAEC i got a quick response from MaxMind, within a couple of hours that the issue should be fixed in their database "next Tuesday" hopefully that means tomorrow. thanks again for your help!     Dear Requester, We have reviewed and accepted your correction for IP range https://protect-us.mimecast.com/s/LNsiCKrG6YS7NBXuMnKkV?domain=192.124.249.0. The corrected data should appear in next Tuesday’s update. We will not send additional confirmation emails for separate corrections (you have submitted) that are accepted within the next 24 hours. You may check whether your correction was applied via our database or web service online demos: GeoIP2 City Database Demo GeoIP2 City Precision Web Service Demo If you have any questions please contact us at correction@maxmind.com. Sincerely, The Team at MaxMind ... View more

@ACI_Admin I'd encourage you to get in touch with our Support team as the issue may be different/unrelated to yesterday's events.   Many thanks! Giac ... View more

Has this changed yet.  I really need the ability to issue a command similar to ios "show inventory" or "show hardware".  Not being able to grab a listing of SFP types and serials is a HUGE miss. ... View more

Yes please, one thing we found is it block countries by where they (the IP's) are registered, not where they actually reside. We found this as they were registered in Russia, but were actually being used in the USA. It blocked the IP's even though they were in the US, so we had to allow Russia....Crazy  ... View more

That's actually the point of the Dying Gasp feature in OAM.  It tells you as the device is dying.  Hence dying gasp.  If the device detects that the PSU(s) have lost input power, it can send a syslog, SNMP trap, or EOAM message before the device's control-plane fails, alerting an NMS or in the case of EOAM or OAM, the upstream device. ... View more