GoToConnect announced they are expanding the IP blocks they use in a couple of months.  The details on the new blocks are at: https://support.goto.com/connect/help/what-are-gotoconnects-ip-blocks-gotoconnect-gotoconnects-ip-blocks?utm_campaign=GTCAnnouncement&utm_source=marketo&utm_medium=email&utm_content=IP-Blocks&utm_term=NA-EN&mkt_tok=Njc3LVhOVS0yMDMAAAF-kbZXHODzwcCB4SGmYqGArozkksnTGWogfUbodUv4K7IyEIDhNfSeYU4hvTaruk5JVtu3pOdtPEnZYXJ8MAPO_0P1r13_MMz7IWUPTQ7iPd-gVU9wVw   I didn't originally configure our Meraki MX-84, so I went to look what is there through the dashboard in the Security & SD/WAN section.  After going through all the menu items I don't see anything that specifies IP blocks other than the Intranet LAN settings in the Addressing & VLANS section and the Firewall Layer 3 and Layer 7 rules, which appear to allow all 8.8.8.8 traffic.  I don't find anything limiting IP blocks.  I also didn't need to reconfigure anything when we installed GoToConnect/Jive VoIP 10 months ago.  Am I missing something? ... View more

I'm adding a second ISP so we have a failover for our network.  I see in the documentation where to add the second ISP's configuration information (SD-WAN Uplink). Presumably I need to connect the cable with the signal from the new ISP (which wasn’t stated in the documentation).  I have the following questions that I did not find answers to in the documentation.   1. Does it matter what port we plug into?  It looks like except for Mgmt., the other port operate as a smart switch, but I didn't want to assume.   2. Is there a primary and failover or does it just randomly grab one available uplink?  If there is a primary, how do we specify the primary?   The uplink section simply specifies entries for WAN 1 and WAN 2.  Their documentation says nothing about how these two uplinks are chosen or interact.   3. Anything else I need to do that I have overlooked. ... View more