Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Luffy
Luffy
Getting noticed
Member since Oct 29, 2017
Aug 27 2019
Community Record
29
Posts
1
Kudos
0
Solutions
Badges
Nov 1 2018
1:05 AM
Hi, I set warm spare mode for 2 MX64 device and also set client vpn. But client vpn didn't connect. Before setting warm spare mode, client vpn has worked well. I didn't change any configuration about client vpn. do you have any experience like this issue ? Thank you,
... View more
Oct 23 2018
1:56 AM
Thank you for your answer. I'll check firmware version. You mean physical connections are not a problem, right ?
... View more
Oct 23 2018
12:14 AM
yes, main root priority is 4096 and backup root priority is 8192.
... View more
Oct 23 2018
12:06 AM
In this case, not only redundant links but also primary links also are blocked by spanning tree. All of L2 Switch are not working well.
... View more
Oct 22 2018
11:55 PM
Thank you, Not stacked, just warm spare setting only. I don't know why looping occurs although warm spare setting was working well.
... View more
Oct 22 2018
10:18 PM
Hi, I built meraki device as below topology. It is a warm spare setting not stacking. After that I saw many looping issue, so all of L2 MS were down. Should I set port-channel on the each L2 MS ? Thank you,
... View more
Oct 17 2018
9:29 PM
Thanks, Is everything good except for HA link ? I will remove HA link between MX devices.
... View more
Oct 17 2018
6:47 PM
Hi, I'd like to know whether this diagram works well or not. 1. Juniper ----- MX side, Does it work well ? 2. MX ------ MS side, Does it also work well ? Do you have any experience to build as this diagram ? Thank you,
... View more
Oct 17 2018
6:17 PM
Hi PhilipDath, Thank you for your answer. How about below diagram ? Does it work well ?
... View more
Oct 17 2018
12:43 AM
Hi, I have a question about vIP subnet. In this diagram, Is it possible ? Does MX can setting dual vIP as same subnet ? Thank you,
... View more
Jun 8 2018
1:56 AM
I think my customer will install 3 or 4 AP with floor tag and set just 1 SSID per a floor.
... View more
Jun 8 2018
12:44 AM
Hi guy, I have a question about maximum SSID in a Meraki AP. One of my customers wants to set Meraki AP in a Hotel. In this case, there are 30 floors in the Hotel. Customer wants to set only a network, not many network in a Meraki organization. I saw the SSID setting there was maximum 15 SSID in a Meraki MR. Can I add more SSID or Should I divide more network in a Meraki organization ? My customer wants to set SSID per floor. In this case, it needs 30 SSID for my customer. Is it possible ? Thank you,
... View more
May 30 2018
6:38 PM
Thank you for your answer. In my understanding to set MS redundancy, there are two options. one is just warm spare between two MS device without any setting. another is stacking setting using stacking cable between two MS device. In this case just warm spare without stacking cable. Does it work well ?
... View more
May 29 2018
11:54 PM
1 Kudo
Thank you for your great answer. I understand what you said. But I can't control ISP modem. ISP modem give me public IP directly, not NAT. I think to use Warm spare, It needs one more public IP in my case. Thank you 🙂
... View more
May 29 2018
11:25 PM
1 ISP and I contracted a public IP to my ISP company. So I don't have any information for IP Pool.
... View more
May 29 2018
10:58 PM
Thank you AjitKumar for your answer. I have a question about Q1. According to this content, I can see "This option does not require additional public IPs " message. It means that basically Option 1 needs 2 different IP but no need additional IP. Is my understanding correct ?
... View more
May 29 2018
10:57 PM
Thank you AjitKumar for your answer. I have a question about Q1. According to this content, I can see "This option does not require additional public IPs " message. It means that basically Option 1 needs 2 different IP but no need additional IP. Is my understanding correct ?
... View more
May 29 2018
10:52 PM
Hi guys, I have a question about warm spare issue. This is a sample diagram. ISP Modem--MX1--(Warm Spare)--MX2--MS1--(Warm Spare)--MS2--MR1--MR2 I want to set redundancy setting for safe operation. Q1. In case of sample diagram, does MS device need to set port channel setting for MX1 and MX2 port ? Q2. Please confirm whether my understanding of connecting physical cable is correct or not as below. ISP Modem---MX1 ISP Modem---MX2 MX1---MX2(Warm Spare) MX1---MS1 MX1---MS2 MX2---MS1 MX2---MS2 MS1---MS2(Warm Spare) MS1---AP1 MS2---AP2 Thank you,
... View more
May 29 2018
10:39 PM
Hi guys, This is Luffy. I tried to set warm spare using two MX device. So I found below link. https://documentation.meraki.com/MX-Z/Deployment_Guides/NAT_Mode_Warm_Spare_(NAT_HA)#Dashboard_configuration According to link there are two option as below. Option1 Use MX uplink IPs: When using this option, the current Active MX will use its distinct uplink IP or IPs when sending traffic out to the Internet. This option does not require additional public IPs for Internet-facing MXes, but also results in more disruptive failover because the source IP of outbound flows will change. Option2 Use virtual uplink IPs: When using this option, both MXes will use a shared virtual IP (vIP) when sending traffic out to the Internet. This option requires an additional public IP per uplink but allows for seamless failover because the IP address the network is using to communicate with the Internet will be consistent. The vIP for each uplink must be in the same subnet as the IPs of the MXes themselves for that uplink, and the vIP must be different from both MX uplink IPs. If both MX are connected to an ISP modem directly, I have some questions as below. Q1. In case of Option 1, Does it need only a public IP ? If so, do they have same public IP in both MX device ? Q2. In case of Option 2, To set vIP, Does it need 3 public IP ? Thank you,
... View more
Oct 30 2017
6:53 PM
Hi PhilipDAth, Thank you for your great answer. I resoved this problem. This is VLAN issue.
... View more
Oct 30 2017
5:21 PM
Hi Adam, Thank you for your reply I already saw the article. But It was no helpful to me. Thank you,
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 1 | 5270 |
© 2024 Cisco Systems, Inc.
