I have a question about warm spare issue.
This is a sample diagram.
ISP Modem--MX1--(Warm Spare)--MX2--MS1--(Warm Spare)--MS2--MR1--MR2
I want to set redundancy setting for safe operation.
Q1. In case of sample diagram, does MS device need to set port channel setting for MX1 and MX2 port ?
Q2. Please confirm whether my understanding of connecting physical cable is correct or not as below.
Solved! Go to Solution.
There are benefits both ways, but I generally prefer stacking as it is easier. You have a single instance of spanning tree. You have a single config which either stack member can take over.