I did open a case but they didn´t really understand the problem. ... View more

I have got also issues with Cisco ISE 3.2 Errors occured since ugrading ISE from 2.7 to 3.2 and Meraki MR30.6 to MR30.7 ... View more

I have got the same issue ... View more

not fixed. Still a known issue. ... View more

Same with copper and with fibre ... View more

  Thank you. Not messed up now. the door is locked. ... View more

16.9 didn´t help a lot. Its concerning spanning-tree connections and aggregates. As a standalone switch it´s no problem. ... View more

I want it for an read only user for the dasbord global map to see the green and hopefully not red dots on a big monitoring screen. So there should be no timeout at all. ... View more

Still UDLD-errors. the newest beta-firmware still has this issue in "rare" circumstances 😂. Here on each place where MS130 are installed on different networks and places. Everywhere!   Switch firmware versions MS 17.1.1 changelog Ms130 known issues In rare circumstances MS130s may experience management plane congestion that results in UDLD alerts and STP transitions ... View more

It‘s a mess. How long do my clients have to wait? ... View more

Patchpanel Switch MS225-48LP , stacked Patchpanel Patchpanel Switch MS225-48LP , stacked Patchpanel Patchpanel Switch MS225-48LP , stacked Patchpanel Patchpanel ….   ... View more

Thank You, I will try this in a test installation. ... View more

Meraki says this is not possible:     ... View more

I am waiting for this feature too, urgently. I have a network in a funfair park and the sales stands are moving around and I need more VLANs (cashdesk VLAN, IP-telefone-VLAN, ...) to be bridged to the sales stands. the cashdesk and creditcard-readers and the ip-Phones need to be connected by cable. So I am looking for to connect a switch in the sales-stand with the devices and this network with an MR accesspoint to the uplink network by WLAN bridge. I do this now with very very old Cisco AIR AP 1242, they do multi VLAN bridgeing very good. But they are very outdated and I wait for a Meraki replacement which can do this.  ... View more

Meraki is still working on this issue. Ticket / case is in work. ... View more

Shure good cables, I testet several used and new cables. Issue on alle copper ports. Issue occures also when connected with 1Gig speed. ... View more

same issue. Each buliding is an own network. Roaming works well with automatic connection but not with guest-networks with splash-page. ... View more

I have 2 Nexus 5624Q in two data centers and FEX overcross in this two data centers and with vPC in the data centers attached so that I can connect a server in data center one with 2*10 Gig at a Nexus in the same data center and 2*10Gig at the other data center on the FEX of the secons Nexus in the other data center and vice versa. Now I heared that Cisco will soon not sell any Nexus any more an I ask myselfe how to build up this redundant construction with Cisco Cat 9500 or with MS425/450 or anything else. ... View more

connected by copper. I did open an case for this issue. Will inform you as soon I have more information. ... View more

Cool thing. Saves a lot of space. ... View more

I can´t complain. It´s working with our iPhones and Meraki MR34, MR42, MR42E, MR44, MR52, MR46, MR46E, CW9164I ... View more

Yes, as just told I am afraid but without releasing the switch from the old owners dashboard you are not able to use it. Can´t you buy an cheap switch in the shop? It´s less expensive than a licence for an Meraki switch. ... View more

I bought for a new project 26 CW9164I accesspoints. They are all connected to MS225-48LP switches. All of the access points are running around 11.3 W with PoE 802.3at. When they are booting or have heavy load then they need more than 15 Watt. ... View more

GENERAL KNOWN ISSUES Connecting a stacking cable to a stack that is online may result in a stack member going offline (present since MS 12) ... View more