Meraki

redsector · ‎Apr 3 2024

Meraki is still working on this issue. Ticket / case is in work.

redsector · ‎Apr 3 2024

Shure good cables, I testet several used and new cables. Issue on alle copper ports. Issue occures also when connected with 1Gig speed.

redsector · ‎Mar 26 2024

same issue. Each buliding is an own network. Roaming works well with automatic connection but not with guest-networks with splash-page.

redsector · ‎Mar 26 2024

I have 2 Nexus 5624Q in two data centers and FEX overcross in this two data centers and with vPC in the data centers attached so that I can connect a server in data center one with 2*10 Gig at a Nexus in the same data center and 2*10Gig at the other data center on the FEX of the secons Nexus in the other data center and vice versa. Now I heared that Cisco will soon not sell any Nexus any more an I ask myselfe how to build up this redundant construction with Cisco Cat 9500 or with MS425/450 or anything else.

redsector · ‎Mar 26 2024

connected by copper. I did open an case for this issue. Will inform you as soon I have more information.

redsector · ‎Mar 25 2024

I have a few MS130-8X switches and they are causing UDLD-errors at the port of the connected switch. Anybody here with the same issue? The uplink goes to an MS120 switch. The MS120 reports UDLD error on the port where the MS130 is connected.

redsector · ‎Jul 25 2023

Cool thing. Saves a lot of space.

redsector · ‎Jul 21 2023

I can´t complain. It´s working with our iPhones and Meraki MR34, MR42, MR42E, MR44, MR52, MR46, MR46E, CW9164I

redsector · ‎Jul 21 2023

Yes, as just told I am afraid but without releasing the switch from the old owners dashboard you are not able to use it. Can´t you buy an cheap switch in the shop? It´s less expensive than a licence for an Meraki switch.

redsector · ‎Jul 17 2023

I bought for a new project 26 CW9164I accesspoints. They are all connected to MS225-48LP switches. All of the access points are running around 11.3 W with PoE 802.3at. When they are booting or have heavy load then they need more than 15 Watt.

redsector · ‎Jul 7 2023

GENERAL KNOWN ISSUES Connecting a stacking cable to a stack that is online may result in a stack member going offline (present since MS 12)

redsector · ‎Jul 7 2023

Most times it worked for me. But not always.

redsector · ‎Jul 7 2023

A new network room with 5 MR225-48LP switches, and 18 attached CW9164. Uplink 2*10Gig fibre as an aggregat.

redsector · ‎Jun 30 2023

Just bought 28 of them for a new office floor.

redsector · ‎Jun 30 2023

Rack before reorganizing: Same rack after reorganizing and new Meraki Switches:

redsector · ‎Jun 30 2023

Accesspoints: CW9164I Q5AC CW9166I Q5AE

redsector · ‎Jun 20 2023

The solution was: my fault. this new accesspoints weren´t set on a floor map. So I couldn´t see them unless the floor maps were unselected. The solution from the Meraki service: Could You please deselect the floor plan? once I've done it, I saw all APs It can be done on the Radio Settings page, top right corner of the map > click on the layout icons > select "none" under floor plan.

redsector · ‎Jun 19 2023

@van604 No issues. It´s working well. It´s about 70x100m (meters!)

redsector · ‎Jun 19 2023

@MK2You are right, I always have to jump and patch. But this project is different: this time I got enough money to patch everything. So I never have to sit in the car and got to patch when they move around.

redsector · ‎Jun 12 2023

No filters.

redsector · ‎Jun 12 2023

Hello I can´t see the Meraki CW accesspoints in the "Wireless" - "Radio Settings". I can see tehm in the "Wireless" - "Accesspoints"-list. Anybody with the same issue?

redsector · ‎May 3 2023

Oly the managed port should be in the entire network.

redsector · ‎May 3 2023

Isn´t that beautiful😍: 4* MS225-48LP, stacked, 2*10 Gig cross-stack aggregated

redsector · ‎Apr 25 2023

I need this for a WAN solution. We replace the Cisco Catalyst switches, they have an own management-port to avoid traffic from WAN comes to intranet. So the ports are WAN but the managementport ist in LAN.

redsector · ‎Apr 25 2023

Hello, I need a list of MS switches which have a dedicated management port for a special project. Or: how and where I can see (online) if the switch has such an port?

About redsector

redsector

Markus Moses

Community Record

Badges