About BrechtSchamp

BrechtSchamp · ‎08-13-2022

5 years old? "Five years old can be a really fun age! Your child loves to play and is extremely imaginative. They still feel little and adorable, but they are becoming quite the conversationalist, and their ability to pick up new information and ask thoughtful questions will seriously impress you. (Src: verywellfamily.com)" I see! Well happy birthday MC! To be honest, I always was impressed by the thoughtful questions you brought up.

BrechtSchamp · ‎08-25-2021

@Aboobacker Thanks for your post. What I meant with that statement is that the MS425 doesn't have dedicated stacking ports, which means for the stacking you need to use the actual ports on the switch. So if you want a 40G stack you're using up those ports and you can't have a 40G uplink anymore. But you're right I worded that incorrectly. It's still physical stacking, just not with dedicated ports.

BrechtSchamp · ‎02-02-2021

Woohoow! It looks so shiny and new. Well done.

BrechtSchamp · ‎01-20-2021

Seems that some of the images are missing on the installation guide pages: https://documentation.meraki.com/MS/MS_Installation_Guides/MS225_Series_Installation_Guide https://documentation.meraki.com/MS/MS_Installation_Guides/MS210_Series_Installation_Guide @CameronMoody, could you have a look at this? Thanks!

BrechtSchamp · ‎01-15-2021

Oooohh fresh blood. Congrats all!

BrechtSchamp · ‎12-16-2020

Took me a while to figure it out too. I got a bit lucky I'm sure cuz I think I was searching for red noses xD.

BrechtSchamp · ‎12-16-2020

I FOUND THE GNOMES! https://community.meraki.com/t5/Smart-Cameras/MV22-Blinking-Red-Offline/m-p/59865

BrechtSchamp · ‎12-09-2020

Been folding as ScHAmPi :D.

BrechtSchamp · ‎10-16-2020

Yes you can include the VLAN. Just change this: f.write(curr_clients[k]['mac']) f.write("\n") To this: f.write(curr_clients[k]['mac']) f.write(',') f.write(str(curr_clients[k]['vlan'])) f.write("\n")

BrechtSchamp · ‎10-15-2020

@Rusalka Have you tried running above script? It outputs more than you need, but when you open the generated .txt file in Excel you should be able to filter out the columns that have "MR" in the third column. That'll give you the number of wireless clients (at that point in time!).

BrechtSchamp · ‎09-13-2020

HA HA HA HA 🤣

BrechtSchamp · ‎09-02-2020

@CptnCrnch but strictly speaking many people would have one extra solution too then.

BrechtSchamp · ‎09-02-2020

@jdsilva right back at ya mister. It was definitely an honour and a pleasure to be a guest for that podcast!

BrechtSchamp · ‎09-02-2020

0 solutions, oh darn, I need to up my game xD. Good job all!

BrechtSchamp · ‎08-28-2020

Size doesn't matter? 😇

BrechtSchamp · ‎08-28-2020

It'll stop working eventually. No option to leave it unlicensed.

BrechtSchamp · ‎08-28-2020

Oh I missed the part where you said you had disabled the local status page. My bad. In that case indeed it shouldn't be loading 😮.

BrechtSchamp · ‎08-28-2020

Saludos y bienvenido Oswaldo!

BrechtSchamp · ‎08-28-2020

Bienvenido Chelomarce! Muy comodos verdaderamente.

BrechtSchamp · ‎08-28-2020

Welcome to the community Karthik! Lots of tips and tricks to find. I'm not going to pick a fight with you 😇.

BrechtSchamp · ‎08-28-2020

Is that you Andy Murray? Welcome to the community. I hope it has what you need, if not, let us know.

BrechtSchamp · ‎08-28-2020

Welcome J. Fasten your seatbelt and enjoy the ride!

BrechtSchamp · ‎08-28-2020

Welcome to the community Christopher. 12 years is a lot! I'm a only child. Once you start paying attention you do see Meraki very often.

BrechtSchamp · ‎08-28-2020

Hey there! 4. Boooooo. 😉

BrechtSchamp · ‎08-28-2020

Bienvenido señor!

BrechtSchamp

Community Record

Badges