Meraki

MarkBrown · ‎Dec 12 2022

Can anyone confirm the Max and Default MTU size on MX100. Does it differ on the MX models? I know support can change the size, I am just looking for information on the sizes. Thank you.

MarkBrown · ‎Oct 26 2021

I just had a different type of issue but similar. Our Provider refused to change from hard coding to Auto/auto I was seeing 2 to 3 % packet drops every 20 to 30 mins. They were seeing the errors on the client-facing side of the ENID. it wasn't till we made them replace the ENID and the new one was left on Auto / Auto did the issue resolve. Seems the MX 100 did not like being hard coding with this provider. Or is using the Hard code something MX units don't handle well?

MarkBrown · ‎Aug 16 2021

We just refreshed to Meraki at 1 of our sites. We are seeing multiple alerts for IP conflicts. The odd thing is the 2 MAC address are identical on the first 10 digits. its for our Cisco server on-site with hypervisor. These devices are statically set. no DHCP scopes are built. On the Meraki the Vlan for this is set to do not respond to DHCP requests. I am not a server person. but anyone knows if Cisco uses a virtual NIC behind the physical? Has anyone seen this issue? Thanks Mark B

MarkBrown · ‎Mar 14 2019

A bit about yourself & your work My Name Is Mark Brown. I work for Coca-Cola of Northern NE Your experience with Cisco Meraki, Currently I monitor and maintain the Cisco routers and switches. We have a added a few MX device to our sites and I am interested in moving further in to the Meraki line. A fun fact about yourselfI enjoy the 5 k mud runs.

Meraki

Community

About MarkBrown

MarkBrown

Mark Brown

Community Record

Badges

Max and Default MTU Size on MX WAN ports

Re: MX64 Internet port link drops at 100/full (okay on auto / auto)

Client IP Conflict

Re: Welcome! Please introduce yourself.

Re: Welcome! Please introduce yourself.