Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Troyee
Community Record
29
Posts
9
Kudos
1
Solution
Badges
Jun 6 2019
2:50 AM
Hi KMNEP, You're right. I think there are no other work around to block the signature using Layer 7 and allow the Workplace Facebook.
... View more
Jun 6 2019
2:46 AM
Good day Everyone, May i ask how can i change the .svg file format of the Network Topology provided by the Cisco Meraki device to .PNG / .JPEG file format. Would appreciate your response. Thanks. NOTE: Topology has an existing 459 MR devices, 22 MS devices, and a MX Firewall.
... View more
May 22 2019
8:55 PM
1 Kudo
Hi Philip, I see, i think that is one of the limitations of the Meraki MX. I hope they can improve this side of the Meraki MX like the other firewalls. Thank you for the response Philip. Appreciated it.
... View more
May 22 2019
8:06 PM
Hi Felix, We can't see the firewall rule link. I think it would be better if you can provide screenshot of your firewall rule. May i ask if you are having a non Meraki firewall as your Uplink? If so, i think you need to allow the ports that is given on the Help Section on the Dashboard that can be found on the upper right side of the pane. I hope this helps. I have attached a screenshot for reference.
... View more
May 22 2019
7:59 PM
Hi Everyone, Hope you're all well. I have a question regarding Public IP. On the MX450, I have an uplink on Ethernet1 having /29 subnet. Is it possible to distribute the usable IP on one of the Meraki MX interfaces (for example: ports 3-25). One of our non Meraki equipment need a to receive a public IP that is not natted. Any recommendation on how i can do it on a Meraki MX device? Would appreciate your advice. Thank you.
... View more
May 9 2019
8:40 PM
Hi Coen, I'm deeply sorry for the late response. I have been away for a couple of days. To answer your question, what i've done was i checked the event logs for what must be whitelisted to allow what was needed on the workplace. Regarding the fb.com issue, mine was blocked. On my point of view maybe it's just a cache for the browser after you applied your newly configured policy. I hope this helps.
... View more
May 8 2019
2:23 AM
Hi Brecht, Upon plugging the redundant power supply i found nothing on the Switch Settings. I've attached screenshot for reference. Thank you. Thanks.
... View more
May 8 2019
2:17 AM
Good day Everyone, I have inserted my 1025WAC redundant power supply for my MS350-48FP. May i seek your help on how i can combine my power for PoE? Will appreciate your response. Thank you.
... View more
May 6 2019
12:42 AM
1 Kudo
Hi Coen, These were the things to check: 1. Do you have a Layer 7 Policy on the firewall rule which contains DENY Social Web & Photo Sharing? If none, proceed to number 3. 2. If yes, erase that firewall rule or allow the Layer 7 traffic. We'll be blocking the traffic by using the content filtering. 3. On the Content Filtering, blocked category websites should have the Social Networking. 4. On the White listed URL Section, I have attached a screenshot for the domains i white listed to allow the Workplace Facebook but blocked the Facebook itself. Then it's done. Please do note that i didn't used wildcard to whitelist the URL's. For the scontent domain, it is always changing. Please check your event logs for this one. I hope this guide helps.
... View more
May 2 2019
7:02 PM
Hi Nolan, Upon checking the Topology that Meraki was giving, the AP's were on different switches. I have a total of 22 MS350-48FP working as access switch and a MS425-32 as my core switch. Thank you Nolan.
... View more
May 2 2019
6:46 PM
Thanks Brandon for the help, appreciated it. I'm running a test now on the ports. I'll give a feedback as soon as i finished the test. Thanks again.
... View more
May 2 2019
6:35 PM
Hi Brandon, Thank you for your response. I'm having an uplink (Access Switch) which is MS350-48FP, all of it were PoE ports. Sadly, they never became a gateway. When we registered the devices and activated them through the license, they already acted as repeaters.
... View more
May 2 2019
6:27 PM
Hi Team, May i ask why my AP's are acting as repeaters even though i had a cable plugged into the AP's and are on DHCP Pool? I have provided a screenshot on this case. May i ask your expertise once again to help clarify this issue. Thank you. NOTE: I have 24 AP's that were acting as repeaters. The total number of AP's on the Organization is 459 AP's.
... View more
Hi, Awesome! this finalized our configuration. I really appreciated everyone on the community. It was a great help for us. Thank you very much.
... View more
Apr 11 2019
8:52 PM
Good day, Hi everyone, i have a question regarding the Port Profile, we had encounter an issue that the SSID Splash Page was not inherited to the port 1 of our Meraki MR30H. The port 1 was used as a wired connection. Have you encountered this issue? or am i lacking a configuration on the MR30H? Would appreciate your response. Thank you.
... View more
Apr 10 2019
10:47 PM
1 Kudo
Good day, Hi everyone, May i ask if it is now possible to aggregate a downlink from Firewall to our Core Switch. Thank you everyone.
... View more
Mar 13 2019
4:01 PM
2 Kudos
Hi Nick, We're gonna be using 8x Meraki 450MX that has a Warm Spare for the VPN Concentrator on the HQ/DC. For all the branches mentioned above will be Meraki 68W. So it will be 700 concurrent VPN connections per 450MX thus, having 8x of it. I hope this helps. Thanks.
... View more
Mar 13 2019
2:24 AM
1 Kudo
Hi Everyone, Just finished talking to the Meraki guys. They gave a very nice solution for this one. The best way to do it is to have a set of One arm concentrator on the Head Office to dissiminate the VPN traffic and to cater all the 25,000 devices. Given that, We'll be having 8 one arm concentrator on the Head Office. Cheers everyone, hope this helps.
... View more
Mar 12 2019
11:30 PM
Hi Brecht, This will be used as VPN Tunnel on different locations. May i ask if MX450 can be used as Active-Active to do a load balance? If not, is there any possible way to cater the 25,000 end devices having 5 devices per branch? Thank you sir.
... View more
Mar 12 2019
11:16 PM
Good day Everyone, May i ask if what device can handle a 5,000 concurrent vpn and an end point equipment that has 25,000 devices. Thank you.
... View more
Mar 6 2019
10:04 PM
1 Kudo
Hi Everyone, Upon troubleshooting, the best way we came up for this issue is that we turned off the Layer 7 blocking on the Firewall Tab and just blocked the Facebook Application on the content filtering while whitelisting the certain domains that the Workplace Facebook was using. I thank you all who replied and assist me on this issue. Appreciate it. Thank you. Output: Facebook Application was blocked and the Workplace Facebook is working.
... View more
Mar 5 2019
7:14 PM
Hi Team, I have a problem on allowing Workplace Facebook and the Facebook Application itself must be blocked. I have put certain domains in the whitelist section on the Web Blocking. These were the domains that i have put in the whitelist section: *.facebook.com *.akamaihd.net *.fbcdn.net *.fb.me *.fbsbx.com As i troubleshoot and checked the logs, the traffic was coming from the Layer 7 filter. It was the Facebook Signature that caused the blocking. Is it possible to separate the Facebook Signature and the Workplace Facebook? Thank you.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 33207 | May 6 2019 12:42 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 3864 | |
| 1 | 1830 | |
| 1 | 33207 | |
| 1 | 2726 | |
| 1 | 9538 |
© 2024 Cisco Systems, Inc.
