hi @AlainAzevedo take a look at something like securly which is focused on the education market.  Meraki MDM / SM was always a hard pitch in the education market (here in the UK anyway)   Securly - The Student Safety Company ... View more

As @rhbirkelund  has eluded to - the Green one is an early release/access dashboard being used to manage Cisco devices i.e Catalyst 9000's.  ... View more

I wasn't expecting that response 🙂  I anticipated it being a different VLAN number.   Is this a newly deployed AP at which point i would state the 'error' will clear over time. ... View more

I know its dangerous to make assumptions but i like to live dangerously 😎 - i'm assuming they may have some endpoints (PC's/phones etc) that are currently statically assigned IP's....just as long as you define their IP and DHCP schema's accordingly then there's no reason why they couldn't be allowed access through the MG's.....! ... View more

hi @RobustMeraki , can you elaborate a little here on what you're trying to achieve?  Fixed IP's of what devices?  Whats the topology? ... View more

Hi @RobustMeraki  - have you explored the possibility of configuring a site-to-site VPN between your Sophos and Meraki and then route client traffic accordingly?   Site-to-Site VPN Settings - Cisco Meraki ... View more

hi @CameronS , what VLAN have you assigned as the mgmt VLAN in your dashboard?  ... View more

Welcome @Juukdit2020 . It’s a very friendly community here and your peers are willing to share their experiences and help with any questions you may have ... View more

Hi @Ziv ,   I don’t know the answer but is there anything helpful in this Meraki Locations Analytics document?   https://documentation.meraki.com/MR/Monitoring_and_Reporting/Location_Analytics ... View more

Hi @hunt41lb , you just need to open up the relevant ports on the Palo to allow the MX to register out:   https://documentation.meraki.com/General_Administration/Other_Topics/Upstream_Firewall_Rules_for_Cloud_Connectivity ... View more

Hi @Mohit_Dhanjal    Maybe take a look at the Meraki FIT    https://community.meraki.com/t5/Meraki-FIT/ct-p/merakifit ... View more

Morning @neosim    Please give this document a read.  Good place to start.   https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MX_Security_and_SD-WAN/General_MX_Best_Practices   As previously mentioned, what are you trying to achieve? ... View more

Well called out @cmr .  People have often called their support into question but like yourself I’ve never had an issue with it.   No first line, straight through to an engineer who immediately works on the case. ... View more

good spotlight @Inderdeep .  Great to see you’re still on the board and contributing. ... View more

Welcome @Bandwiches, that’s an expensive hobby!! ... View more

Here’s an old document for the second generation APs i.E MR33’s   https://telecom4good.org/wp-content/uploads/2019/06/Cisco-Meraki-MR-Access-Point-Comparison-Chart.pdf ... View more

I think you’ve answered your own question there @PhilipDAth  Why go with an unknown as it’s your reputation on the line with your customer.  If you can wait out the lead times then go with your gut feeling. ... View more

Just to follow on from @ww ’s awesome reply - the number of tunnels will depend on your design.  Are you looking for full mesh (hub) or site to site (spoke)?   The calculations to work out each can be found in the below document    https://documentation.meraki.com/Architectures_and_Best_Practices/Auto_VPN_Hub_Deployment_Recommendations ... View more

Good Morning @Surya10101    Please take. Read through:   https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/Approximating_Maximum_Clients_per_Access_Point   These are theoretical limits ... View more

Good Morning @Pugazh    Welcome to the community. Lots of lovely people here who are happy to share their experiences and knowledge.   Have fun ... View more

 they’ll be an option for Destination - Local LAN.  What is that set to?   Have you checked your DHCP scope isn’t depleted?  Is it sized appropriately for the number of devices connecting  ... View more

Hi @Telthanya    It’s under Wireless > Configure > Firewall and Traffic Shaping ... View more

Morning @Telthanya    Is this a new deployment?   Are you saying that wireless clients are able to connect to the SSIDs but aren’t getting an IP by DHCP?   Have you checked the firewall setting on the SSIDs that it’s not set to Block LAN? As I assume this is where your DHCP server resides. ... View more

If you look closely through the spec sheets of both the MR46 and MR44 you appear to get a little more oomph from the MR46's.  Also pay attention to the signal coverage patterns within the data sheets, the coverage looks greater for the MR46's also:   https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR46_Datasheet   https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR44_Datasheet   What you may come across during the procurement process however is pressure from the sales rep to purchase the MR44's as they're shipping slightly quicker. ... View more