Still ongoing. I haven't had an update from cisco since May. ... View more

If the MPLS is your primary then it is expected behavior for the MX to try and attempt to form a tunnel over it. I don't believe there will be an option  to disable autoVPN tunnel over a Primary uplink.    You can enable Active-Active to have a "quicker" failover behavior but I'd start with the KB I previously linked 🙂  ... View more

Hello ,   We have dedicated sw for access points, two ports from access point go to two switch (stack) in power sharing mode.   We get this Ip address when wifi direct(Mircast) is connected via WLAN virtual adaptor irrespective of TV/laptop conncted to our commapny ssid. Laptop IP : 192.168.137.1  TV IP : 192.168.137.247    Scenario 1 : TV and Laptop connected our company SSID or Mobile hotspot When we try Miracast Issue : We see ad hoc issue while connecting   Scenario 2: TV and Laptop not connected to our guest SSID or Mobile hotspot (bit Wifi is enable in TV) When we try Miracast Issue : We see ad hoc issue while connecting       ... View more

Hi There,   Thanks for reaching out. What is the purpose of buying a Cisco firewall? We have many Android and iOS devices, but employees are having issues with VPN. if it is another option please let me know.  ... View more

Any port going up and down will trigger an STP event, not an election that could be disruptive, but a notification. ... View more

+1 to @DarrenOC's comment https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/MR_Firewall_Rules You will be able to block certain apps/websites through the MRs firewall page ... View more

Hey there,    Does a nslookup return anything?    You can try toggling the hostname (just add a character and revert it back after about 15 minutes) to see if this helps.    Other wise I'd suggest raising a ticket with support to see why the MX isn't reporting its hostname.  ... View more

Hey there,   The INVALID_ID_INFORMATION error means that the traffic selectors (subnets) did not match. Is one more specific than the other?   The VPN status is showing green because Phase 1 is up, this does not take into account of phase 2 unfortunately.    If the traffic selectors match exactly then I'd suggest raising a ticket with the NMVPN vendor and Meraki support to see if there's anything weird going on. ... View more

+1 to this Unfortunately, there is no way to recover the access. You will have to get the old provider to remove the devices from their dashboard so you can claim them into your own. Support cannot assist in this due to our policy so you may have to get some legal assistance.  ... View more

Hey there,    +1 to Raphael Meraki devices use Meraki/public NTP servers, this is not configurable. If you can confirm this traffic is indeed being sent by the MVs to your private server then I would suggest opening a ticket with support. ... View more

Thank you to you and @cmr, the bonding mode was changed to Mode 1, this is Active/Backup mode so is a switch independent mode so doesn't require the aggregation of the ports.  I want to avoid port aggregation for the time being until all the faults with the switches are resolved. ... View more