Community Record
34
Posts
3
Kudos
0
Solutions
Badges
a week ago
We have two non-Meraki IPsec tunnels configured for our network. They are to separate remote peer IPs. And each peer will need a secondary tunnel configured and both primary & secondary tunnels configured with the proper local-IDs to specify which tunnel is supposed to come from the FIA and which from the coax. Is there any supporting documentation to support the configuration.
... View more
Feb 28 2025
6:05 AM
Yes, tested category and it's allowed and added to allow URL but still we are unable to access.
... View more
Feb 28 2025
5:43 AM
We need to allow certain URL for accessing new MFA url, I have added URL to layer 3 outbound policy and whitelisted in content filtering and still unable to access, Is there any different config we need to do for allow new MFA url? am-landing.i2.automate-webservices.com/?hac=H90AAWOK&userFullName=Amy Scaggs&username=awruck01
... View more
Labels:
- Labels:
-
ACLs
Feb 27 2025
6:02 AM
I need to allow RC IP need to be added to the "allow" list for AMP and Intrusion Prevention. Is there any documentation I can refer to perform this configuration.
... View more
Feb 13 2025
6:38 AM
172.x.x.x is our client VPN subnet, 192.168.x.x is our VLAN. Can you share any Meraki documentation related to this configuration.
... View more
Feb 13 2025
5:39 AM
We are having an issue when a user logs in via VPN from an ip range that is same as ip range as office. Office ip range is 192.168.x.x when a user logs in from an ip range that is same we cannot access the office internal server, which is ip 192.168.x.x. Is there a way to maybe map an IP that is same as VPN subnet 172.x.x.x/24 to the server?
... View more
Labels:
- Labels:
-
Client VPN
Jan 13 2025
5:56 AM
I have 4 different sites in Meraki and wanted to set up a VPN to a disaster recovery plan between the sites, where we’d connect by VPN to a backup data center in the event that their primary site was to become unavailable. Do we have any documentation for step by step process.
... View more
Labels:
- Labels:
-
Auto VPN
Jan 8 2025
8:46 AM
Need to block all outside VPN connections in Meraki. How to configure this and what are the information required. Is there any supporting Meraki Documentation to refer.
... View more
Dec 4 2024
10:54 AM
When we try directly from Meraki network the site is getting blocked even though the URL is whitelisted in content filtering also added in outbound firewall policy.
... View more
Dec 4 2024
10:43 AM
We want one of the websites to be allowed, I have added the URL to allow list in content filtering also added to outbound firewall policy. While checking in appliance status able to ping from default but unable to ping from management VLAN's how to resolve this issue?
... View more
Labels:
- Labels:
-
Firewall
Nov 5 2024
6:22 AM
2 Kudos
Creating a QoS rule with those subnets won't work? with unlimited bandwidth and high priority.
... View more
Nov 5 2024
5:54 AM
How to configure a global client bandwidth shaper on the Meraki of 100MBPS/per client. With the exception of IPs in the range and ignoring the shaper and having unlimited bandwidth. Please share If there's any documentation that could support configuration.
... View more
Nov 4 2024
1:19 PM
I need to open few ports in Meraki for using Sonos, I have created outbound firewall rule with only ports source and destination any. And still, I'm unable to access it. Is there any other way we can allow access. https://support.sonos.com/en-us/article/configure-your-firewall-to-work-with-sonos
... View more
Labels:
- Labels:
-
Firewall
Oct 28 2024
11:29 AM
How to assign a MAC with a public IP address of WAN subnet with a VLAN and NAT. Please share documentation for reference.
... View more
Oct 28 2024
6:26 AM
For prioritize VLAN network traffic what definition we need to give and what DHCP tagging?
... View more
Oct 28 2024
6:07 AM
How to use QOS or another method to prioritize VLAN network traffic as below: Priority 1: VLAN 2 Priority 2: VLAN 1 Priority 3: Other VLANs Is there any supporting document to configure and what we need to tag for prioritizing VLAN traffic.
... View more
Oct 17 2024
12:52 PM
We session expiration concerning guest Wi-Fi. we are checking to expand the time out as guests are complaining they get booted while still on-site. Can QoS features as related to similar reports of being dropped from the network. If there's any documentation to support configuration would be helpful.
... View more
Oct 15 2024
12:44 PM
Hi @pmhaske , For example, in Security & SD-WAN -> traffic shaping. Add a new shaping rule Definition (All VoIP & Video conferencing, Bandwidth limit (Obey network per client limit), Priority (High), DSCP tagging (46 EF) will this configuration work?
... View more
Oct 15 2024
12:42 PM
For example, in Security & SD-WAN -> traffic shaping. Add a new shaping rule Definition (All VoIP & Video conferencing, Bandwidth limit (Obey network per client limit), Priority (High), DSCP tagging (46 EF) will this configuration work?
... View more
Oct 9 2024
7:27 AM
We have a specific application that is not getting enough bandwidth over cellular and was hoping to see if prioritizing data for that application would solve that. How can we achieve this in Meraki and if there's any configuration document would support.
... View more
Oct 3 2024
9:58 AM
In Meraki switch Polycom is connected to port 8 and PoE port 1 was denied power. So, port 8 also not drawing power. How to fix this? MS120-8FP
... View more
Labels:
- Labels:
-
Other
Sep 30 2024
11:49 AM
1 Kudo
Is it possible to assign a Public IP address to port 3 of Meraki router which is under VLAN interface and how can we configure?
... View more
Labels:
- Labels:
-
Other
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 722 | |
| 1 | 1357 |
