Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Vishal07
Community Record
16
Posts
0
Kudos
0
Solutions
Badges
May 27 2024
9:32 PM
I have checked your link. But the option showing in document doesn't appear in windows client vpn
... View more
May 27 2024
9:53 AM
That I will check and confirm, but when i do ipconfig/all default gateway shows 0.0.0.0. So I think if already been uncheck.
... View more
May 27 2024
8:50 AM
Hi all, Facing an internet slowness issue after connecting to client vpn, where some website wont open, some takes time to open. No issue for Lan, Wifi user. Below is my architecture
... View more
May 6 2024
1:31 AM
So it means for MX to be failover either both lan or Wan uplink should fail ?. Also if I configure trunk port of vlan 10 and 20 instead of access port, will it do failover if primary MX lan (trunk) port goes down with active Uplink ?
... View more
May 5 2024
11:43 PM
So i can go with my topology and there's no challenge in it ?. What if one of the uplink and one Lan cable fails [example vlan 10] from primary Mx ?. Will it fails inspite of Secondary uplink active on Primary Mx
... View more
May 5 2024
8:44 AM
Hi Team, Can we configure Meraki Warmspare with single L2 Switch. Pfa diagram and let me know if its works or not.
... View more
Labels:
- Labels:
-
Firewall
May 1 2024
6:37 AM
It's totally not manageable so I don't think so. But link between L2 and hub switch will be in access vlan.
... View more
May 1 2024
5:51 AM
Configuration L3 vlan and trunk port on MX would flow the traffic to Hub switch(hub switch is not manageable) which is connected to L2 switch ?
... View more
May 1 2024
1:57 AM
Hi Darren, Yes MX will be connected to L2 switch with configuration of trunk at both ends. As per your reply should I consider that configuring trunk port between MX and L2 with required vlans (10,90) sufficient to flow/pass required vlans into network. Pls note : L2 switch are connected to Hub at downstream and their users should be connected with vlans 10,90.
... View more
Apr 30 2024
8:48 PM
Hi Team, Does configuring trunk port consists of multiple vlan (90,10) on Mx activates the vlan or it needs to configure an port with single access vlan. Example Network configure on MX 90.90.90.1/24, 10.10.10.1/24 Port 5 will be trunk consists of both clan. Does trunk configuration allow traffic of that vlan to flow entire network
... View more
Labels:
- Labels:
-
Firewall
Feb 26 2024
11:45 PM
Hi All, Can we achieve fixed ip assignment to mac address reservation to client machine without configuring reserved ip ranges in our dhcp server configure in Meraki Mx. Pls find attach snapshot for you reference.
... View more
Feb 25 2024
7:07 PM
Hi All, Can we configure geo location base rule/access rights for client vpn and port forwarding rules ?
... View more
Labels:
- Labels:
-
ACLs
-
Client VPN
-
Firewall
Feb 16 2024
3:30 AM
Hi All, My organisation had purchased an two quantity of Meraki MX 105 that will configure as Warmspare (High availability). However we have purchased single Advance security licence. Would it work for both device or we have to buy one more licence for another hardware?
... View more
Labels:
- Labels:
-
Firewall
© 2025 Cisco Systems, Inc.
