Hi,   We are considering fortigate as perimeter Fw and Merki Mx as Core FW, need to know if i configure warmspare using private ip then will it be Mx vip ip (192.168.1.4) would be next hop for fortigate to reach lan subnets or it would be individual Mx ip. PFA diagram ... View more

Hi  We are using MS switch as wan switch to segregate isp 1 and 2. As we know meraki devices needs to be connected to meraki cloud to get live and pass any traffic. PFA diagram and let us know, do we need to assign public ip to wan switch to get meraki mx connected to internet. Also if i assign temporary public ip to Ms wan switch and later remove it post Mx connected to internet ?                 ... View more

Hello All,   I have created site to site vpn between Meraki (location A) and non meraki peers (location B) and its working as expected. However now i need to add subnets of (location C) having Meraki Mx to flow via Location A and then routed to location B using same above created site to site vpn. Here i have added subnets of location C into location A and B tunnel. Can anyone tell me what else i have to configure here ?   Do i need to configure tunnel between Location A and C ? or it will configure via auto vpn ? ... View more

Hi All,   Need help on below points.   1. Procure below  license for Mx 105 HW, can we use it to setup Virtual Mx VMx-L, if we have in spare ? Meraki MX Large Essentials EA 3.0 LIC and Support   2. Do we need to buy or procure any license from Azure, if we plan to deploy virtual mx in their cloud ?   3. What will be preferred mode for Vmx in azure if we are planning to use for vpn termination ?   4. Does Vmx-L supports Nat mode in Azure? . below link says it doesnt   https://cloudcontrolled.uk/wp-content/uploads/2019/06/vMX100-Setup-Guide-for-Microsoft-Azure.pdf?srsltid=AfmBOoqxiNUAY4vZJ4I8vEu-S3ZaAvO5jqUom4AMY9JckdIHs609VLW5 ... View more

Hi All,   I have configured an Non meraki vpn peer tunnel where i'm facing an issue tunnel coming up only with primary uplink configure in meraki sdwan. Need to know is it any limitation of meraki mx ?. Also i have refer in document vpn failover would be possible if mx version 19.1.4 and above. What would be the problem here. PFA snapshot.       ... View more

Hi All,    I have configured warm spare between 2 Mx with distinct ip public to each Mx. Need to know how will my site to site vpn, RA vpn, and dnat traffic flow when primary Mx or its configure Isp ip goes down. Would it be auto failover to Secondary MX isp ip ?   Primary MX public ip 1.1.1.2/29 Secondary Mx Public ip 1.1.1.3/29 Mux configure up 1.1.11/29 ... View more