Meraki

AjitKumar · ‎Jul 27 2018

Hi Francis The following url may help you. https://documentation.meraki.com/zGeneral_Administration/Other_Topics/Firewall_Rules_for_Cloud_Connectivity

AjitKumar · ‎Jul 26 2018

Hi, Excerpts from the followed url suggests "While in low power mode, the MR will disable its Air Marshal radio as well as one out of three transmit streams on the 2.4 GHz band (leaving two transmit streams still operating). Despite being in low power mode, the device can still supply full 802.11ac capabilities." https://documentation.meraki.com/MR/Monitoring_and_Reporting/Low_Power_Mode

AjitKumar · ‎Jul 25 2018

Hi Hope you have referred the following url https://documentation.meraki.com/MX-Z/Access_Control_and_Splash_Page/Customizing_the_Splash_page However as Adam said one should have HTML knowledge to customize.

AjitKumar · ‎Jul 17 2018

Hi Hope you have tried browsing on her PC enabling "incognito mode". Also how about Packet Capture?

AjitKumar · ‎Jul 17 2018

Hi Hope you have tried browsing on her PC enabling "incognito mode". Also how about Packet Capture?

AjitKumar · ‎Jul 16 2018

Hi This is challanging. I do not see any option on the Dashboard to achieve this. One Idea is to configure the SSID in bridge Mode. TAG the SSID with a VLAN. Limit the DHCP Pool on that VLAN.

AjitKumar · ‎Jul 13 2018

Hi Leif, I believe LIVE usage (client wise) is not possible from the Dashboard. May be a Syslog server / API might help you to have LIVE Analytics. (Please wait for some more suggestions) As of now the dashboard offers Analytics in the following pages Organization / Network Wide->Summary Report Network Wide->Traffic analytics Network Wide->Clients

AjitKumar · ‎Jul 9 2018

Hi I hope you have gone through the following Url. This document give us the detailed procedure of resetting the devices to Factory Defaults. https://documentation.meraki.com/zGeneral_Administration/Support/Resetting_Cisco_Meraki_Devices_to_Factory_Defaults#MX_Security_Appliance_(MX80.2F90.2F100.2F400.2F600) Also deleting from Inventory and moving to another network will download the configuration of "New Network" from Meraki cloud overwriting the existing on to the MX100.

AjitKumar · ‎Jul 3 2018

Hi Marco A quick search got me the following Url (Hope you have referred this) https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Configuring_the_MS_Access_Switch_for_Standard_VoIP_deployments

AjitKumar · ‎Jul 3 2018

Hi Samuele I could search the following KB for you. (seems to be not updated however) https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Approximating_Maximum_Clients_per_Access_Point A piece of excerpt is copied below for quick reference. Note: Each access point has a technical limitation of 128 clients maximum per radio. Please note that this is only a theoretical maximum; in practice, interference caused by multiple clients communicating simultaneously will cause this limit to be far lower.

AjitKumar · ‎Jul 1 2018

Hi Marco The following url provides detailed literature on Link Aggregation along with a Youtube Video (Documenting the steps). https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Switch_Ports#SwitchPorts-LinkAggregation

AjitKumar · ‎Jun 25 2018

Hi Cisco Meraki MX64 certainly offers redundancy and load balancing between 2 WAN Interfaces. [Screenshot below] Also on dashboard under [Security Appliance-> Traffic Shaping] offers you various options of Traffic Routing and Load Balancing. [Screenshot below]

AjitKumar · ‎Jun 25 2018

Hi In addition to Splash Page frequency. Hope you have verified Authorization Parameters available under Network-wide->Users (User management portal).

AjitKumar · ‎Jun 20 2018

Hi Have you tried this? Create A NEW open SSID and try connecting to the same. If successful try enabling WPA on the SSID and try connecting. Incase the connection is successful. Try integrating Radius Server and then Try connecting. This might help you analyze the stage where the issue could be.

AjitKumar · ‎Jun 14 2018

Hi I believe the vMX100 have the similar capabilities as a physical MX appliance The following url on the Page No. 3 suggests upto 250 Max concurrent VPN tunnels. https://meraki.cisco.com/lib/pdf/meraki_whitepaper_mx_sizing_guide.pdf

AjitKumar · ‎Jun 14 2018

Hi I too have obseverved inconsistency in this topology for a client of mine. There after I have been using a direct connection. I never tried this topology again.

AjitKumar · ‎Jun 14 2018

Hi I believe you should have a direct connection between MXes.

AjitKumar · ‎Jun 14 2018

Hi Your screenshot is not visible.

AjitKumar · ‎Jun 7 2018

Hi, I hope you have gone through the following KB. https://documentation.meraki.com/MV/Other_Topics/Restricting_Access_to_Cameras This displays the possible privileges.

AjitKumar · ‎Jun 5 2018

Hi Similar devices in a single network update at the same time. Also I believe the firmware size is in MBs. However I shall reiterate the upgrade download is negligible. I have not experienced heavy downloads atleast for MRs.

AjitKumar · ‎Jun 4 2018

Hi I am afraid. This may not be possible as of now because firmware update works on the basis of per network not per device.

AjitKumar · ‎Jun 4 2018

Hi I understand each device will download the new firmware individually. However the size of firmare is negligible incase you are upgrading.

AjitKumar · ‎May 31 2018

Hi Stu You are right. PPPoE configuration is possible only from the local admin page as of now. Ideally you should be directly connected to MX over Ethernet to access the local admin page However this is accessible via LAN and WAN too.

AjitKumar · ‎May 29 2018

Hi Luffy Is this the Topology you are trying to achieve. If yes I guess this should work.

AjitKumar · ‎May 29 2018

Hi Luffy How many internet links do you have? If you have 1 ISP? What is the IP pool?

About AjitKumar

AjitKumar

Ajit

Community Record

Badges