Meraki

alemabrahao · ‎Jun 20 2023

In an ideal wireless network design, the ideal is not to overlap the APs on each floor, so I suggest you to change the positioning of the APs between the floors. Something like this.

alemabrahao · ‎Jun 20 2023

Take a look at this. https://documentation.meraki.com/MR/Monitoring_and_Reporting/Common_Wireless_Event_Log_Messages#Fields_Seen_in_802.1X_Failure_Reason Did you test the SSID without authentication? I suggest creating an open SSID authentication to validate with it will work. You will receive IP, be able to browse, etc.

alemabrahao · ‎Jun 20 2023

And maybe you can think about use Splash Access solution. https://apps.meraki.io/en-US/apps/381807/splash-ad-authentication

alemabrahao · ‎Jun 20 2023

Take a look at this: https://developer.cisco.com/codeexchange/github/repo/rafael-carvalho/meraki-azure-ad/

alemabrahao · ‎Jun 20 2023

Are 802.11r and 802.w enabled?

alemabrahao · ‎Jun 20 2023

30 days, and you can't increase it. https://documentation.meraki.com/General_Administration/Privacy_and_Security/Cloud_Data_Retention_Policies

alemabrahao · ‎Jun 20 2023

It's probably why you are using co-termination licensing and he is using per-device license. Sorry for the question but why do you need the tag?

alemabrahao · ‎Jun 19 2023

Take a look at this: https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Site-to-site_VPN_over_MPLS https://documentation.meraki.com/MX/Networks_and_Routing/Integrating_an_MPLS_Connection_on_the_MX_LAN

alemabrahao · ‎Jun 19 2023

I don't know if I understand correctly, but maybe Source-based default routes is an option. https://documentation.meraki.com/MX/Networks_and_Routing/Source_Based_Default_Routing

alemabrahao · ‎Jun 19 2023

Yup, it's ok:

alemabrahao · ‎Jun 19 2023

What would be the problem of connecting a switch to another? I would particularly configure a LACP between the two switches, but of course if ports are available.

alemabrahao · ‎Jun 19 2023

There is some error code. https://documentation.meraki.com/MX/Client_VPN/Guided_Client_VPN_Troubleshooting/Unable_to_Connect_to_Client_VPN_from_Some_Devices

alemabrahao · ‎Jun 19 2023

Take a look at this. https://documentation.meraki.com/MX/Client_VPN/Guided_Client_VPN_Troubleshooting#Common_Causes

alemabrahao · ‎Jun 19 2023

Check the documentation here. https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Using_Google_OAuth_Splash_with_a_Walled_Garden

alemabrahao · ‎Jun 19 2023

Unfortunately with the dashboard options you won't be able to do this automatically. You would need a third party solution. One option is to integrate with AD and on the server set a password expiration policy.

alemabrahao · ‎Jun 19 2023

There is a Radius test on the SSID.

alemabrahao · ‎Jun 19 2023

Both APs are interfering each other. It's not a valid test. You should have power of one of those, and perform a test.

alemabrahao · ‎Jun 19 2023

Have you checked if that AP can communicate with the Radius server? You need to add your public IP ad a Radius client in you Radius server.

alemabrahao · ‎Jun 18 2023

Yes, you can define the size of this list, so I think that It's the best option.

alemabrahao · ‎Jun 18 2023

It's kind of complicated, because you'll need to put the MX on the network one way or another, so in order not to cause any problems, my suggestion is to do the tests in a maintenance window.

alemabrahao · ‎Jun 17 2023

I didn't understand your question. If you want to know if the ACLs on MS works well the answer is yes. https://documentation.meraki.com/MS/Layer_3_Switching/Configuring_ACLs

alemabrahao · ‎Jun 17 2023

I'm my opinion the best way is try to learning by your self. I really hate ChatGPT.

alemabrahao · ‎Jun 17 2023

But I personally don't think this will work. It would be easier if you had a layer 7 firewall.

alemabrahao · ‎Jun 17 2023

You need to allow DNS.

alemabrahao · ‎Jun 17 2023

I'm sorry, but what you want doesn't make any sense. Whatsapp uses TCP 443 (HTTPS) to pass the majority of the connection traffic but it also uses TCP 80 (HTTP). If voice is used, then ports 4244, 5222, 5223, 5228,50318, 59234 & 5242 are used. UDP Ports: 34784, 45395, 50318, 59234.

About alemabrahao

alemabrahao

Alessandro Abrahao

Community Record

Badges