Looks to me like there is an arm that goes across to assist the mount ... View more

@GeorgeB Thanks - with a mobile browser we will still be logged out automatically?   All of our clients with MV devices want to use iPads mounted to the walls to view the camera streams. The mobile app doesn't accommodate this and the mobile browser logs them out after a period.    Any thoughts or information on when the mobile app will get some desperately needed love? ... View more

In that rack there is an optical cable attached to the light so you will see the status on the front of it 🙂 ... View more

This caused us issues on a potential sale when the client viewed the app.    Heads up Meraki this can't be helping the MV line in particular! ... View more

Ha i've been caught by this before and meant to check if there was an easy link Wish request coming up ... View more

I would be concerned about that if it is the case. Just hoping onto an IP of a VIP or engineer could get you access to places you shouldn't be. File a case ... View more

Just watching from this side of the pond! ... View more

I agree - to create what you want you will need to make some changes to the Catalyst. A refresh, some MS / MX will make it all a lot easier ... View more

On the netgear set the switch port to access and test again What model of Netgear out of interest ... View more

@jdsilva 😄      ... View more

You chaps have far outstripped me!   @MeredithW @CarolineS where is the UK swag! ... View more

You don't need to change the VLAN settings, those settings are correct. If you plug a switch into the MX can you get an IP through DHCP connecting into the switch with a laptop? ... View more

Hi @LouisPaquin    With the subnets you've mentioned, you'd end up with two LAN's on the same subnet. The MX would not know to route the traffic over the site to site.   You would be better served by creating separate subnets for this sort of setup     ... View more

Ok - can you plug into the the MX port directly and confirm you get an IP. With another device do ether same and see if you can ping between the two ... View more

What is handling the DHCP for these VLAN's? If you place two devices on them, are you able to ping each other? Under "Security & SD-WAN > Firewall you have no rules in place?   Under "Network Wide > Event Log" is it showing any issues ... View more

@KA    Yes this is a common scenario we have, when taking over sites and beginning the change or update of equipment. We usually start at the gateway to secure ingress and egress into the network then work back replacing the network equipment.   You shouldn't have any issues doing this 🙂  ... View more

It can happen, its rare but i've had a few die off on me. On each port you've set the native VLAN to the same as the switches? Gateway for the VLAN is the MX unit No firewall rules in play on the MX unit? The Netgear switches are unmanaged? ... View more

That should be the case - however to rule out something going wrong i'd plug it back in as its a quick check. How are the VLAN's setup on the MX? ... View more

That would be the best approach if you are able to ... View more

Hi @tantony    The MX doesn't require an internet connection to continue to function and route VLAN's. In the setup you have mentioned the VLAN's should be working, assuming the ports have been setup correctly along with the firewall rules. Can you connect the MX to the internet to perform the test to examine what is taking place?   However any configurations made in the dashboard will not be applied to the MX until it has connected. Without a Dashboard connection you will be very limited in what you can do with the MX and what you can see.   If you are unable to supply the MX with a connection to Dashboard then you may be better going with a device with onboard management rather than Cloud management.    ... View more

Well done all. Congrats  ... View more

Thanks all! @BrechtSchamp 👍 Really appreciate the welcome and recognition    @CarolineS yes Green thumbs up would be excellent! ... View more

As mentioned above, they should all work. However some are certified by vendors. Just because they are not certified doesn't mean they won't work ... View more

Thinking about it - I would agree its a hardware based limitation. The MS isn't geared to provide such high throughout. But as its just testing the tunnel to Meraki it doesn't need to be able to push great bandwidth so both are acceptable ... View more