Meraki

CptnCrnch · ‎Aug 10 2022

I hope this was transalted correctly... 🤔 A estas alturas, como muy tarde, alguien debería haber reclamado el número de serie. 😞 Aconsejaría no comprar hardware usado de Meraki sin saber exactamente su procedencia.

CptnCrnch · ‎Aug 5 2022

Great news @DexterLaBora! Thanks for sharing (and caring)!

CptnCrnch · ‎Aug 5 2022

Fantastic start @speakerfritz! Congrats to all other constributors too of course. 👍

CptnCrnch · ‎Aug 4 2022

Well, that's what I call optimizing! 🤣

CptnCrnch · ‎Aug 3 2022

Apart from that: I think everyone "only" taking the E-Learning is missing something really big. Merakis CMNA instructors are doing a helluva great job! 🙂

CptnCrnch · ‎Aug 3 2022

I'd possibly start by running Wireshark on the endpoint itself. Many things like slow DNS responses etc. are quite easily detectable from there. If there's nothing obvious, I'd go further down the network: are these clients located "behind" WiFi? Are they working via cable? Is everyone affected or only single users?

CptnCrnch · ‎Aug 2 2022

To be honest: I'm not even understanding what qour question is 🤔

CptnCrnch · ‎Aug 1 2022

Sure. You'll find the health status directly on the start page of the Dashboard and also on the device status page. By using live tools, you can also check throughput to the Dashboard: https://documentation.meraki.com/MX/Monitoring_and_Reporting/Appliance_Status Usage can be found too: https://documentation.meraki.com/MX/Monitoring_and_Reporting/Device_Utilization

CptnCrnch · ‎Jul 27 2022

Correct

CptnCrnch · ‎Jul 25 2022

Thanks for the info!

CptnCrnch · ‎Jul 24 2022

@RaphaelL congrats and a very warm welcome to the team! 😎

CptnCrnch · ‎Jul 21 2022

MQTT rocks!

CptnCrnch · ‎Jul 21 2022

Wow, that's an interesting one! Thanks for keeping us posted. 👍

CptnCrnch · ‎Jul 21 2022

Very warm welcome @AmyReyes and @Christopher_S to the best IT community I'm aware of! 😎

CptnCrnch · ‎Jun 23 2022

Additionally, a Flow based solution (e.g. Cisco Secure Network Analytics) would strengthen your security posture up a lot. 😎

CptnCrnch · ‎Jun 22 2022

You should get in touch with Meraki support ASAP. Anyone in here will be able to help you out with that one.

CptnCrnch · ‎Jun 21 2022

I'm not sure if I'm getting your point. Do you mean you can't klick on "Save" after you upload the XML file?

CptnCrnch · ‎Jun 9 2022

Wow, that's a great project. Thanks a million for sharing this!

CptnCrnch · ‎Jun 9 2022

No worries: AutoVPN will take care of that for you.

CptnCrnch · ‎Jun 8 2022

1. MX250 will be able to handle (up to) 4 Gbps of "regular" firewall traffic (without IPS and AMP) 2. If you're using advanced features like IDS / IPS / AMP, thorughput will drop (up to) 2 GBPS 3. VPN throughput will be (up to ) 1 Gbps

CptnCrnch · ‎Jun 6 2022

Amazing! Looking forward to meeting you there!

CptnCrnch · ‎Jun 5 2022

Yes, it's also only used for AutoVPN: https://documentation.meraki.com/MX/Networks_and_Routing/BGP

CptnCrnch · ‎Jun 5 2022

Correct, MX can leverage OSPF to advertise remote VPN subnets only: https://documentation.meraki.com/MX/Site-to-site_VPN/Using_OSPF_to_Advertise_Remote_VPN_Subnets "Note: Please note that the MX will only advertise Meraki Auto VPN routes (including static routes shared into Auto VPN) with OSPF. The MX will need static routes configured for any other local subnets."

CptnCrnch · ‎Jun 2 2022

Apart from that, you could use https://support.umbrella.com/hc/en-us/articles/230904088-Preventing-circumvention-of-Cisco-Umbrella-with-firewall-rules as a base to also include other means like DoH or DoT.

CptnCrnch · ‎Jun 2 2022

DNS is port TCP/ UDP 53, not 54. Or is that a simple typo?

About CptnCrnch

CptnCrnch

Chris

Community Record

Badges