No I only know they boot with 1.1.1.1   address  no one has explained the reason.  I just upgrade 1 switch at a time now ... View more

I have 2 x SSID  one 2.4Ghz and one on 5Ghz  Which is good best practice.  trouble is the algorithm just looks at the number of SSID per AP  not number of SSID per Band.   Admittedly this will change with 6Ghz  having a 6Ghz only SSID is not good practice due to the  number of channels and you need 5 Ghz to give the neighbor reports  to know what 6Ghz channels to scan. ... View more

I opened a support case to at least get all the organisation names affected by this.   I was told  "Currently, we cannot provide the list of affected networks to the customers."   Find this hard to believe when Meraki sent out emails to contacts "Currently Using" ... View more

Elon Thank you.     ======================================   To bypass the router, go to the App home page > Settings > Advanced Starlink App version must be at least 2.0.19 to work The toggle button on to bypass the Starlink router This allows you to completely disable the Starlink Wifi Router. You would need to utilize a Starlink ethernet adapter in order to plug in your own equipment. While Bypass mode is enabled, router commands will not work. If the toggle switch does not appear in the Settings tab, can factory reset the router and/or delete and re-download the app. App Message in red text when Bypass is enabled: "Bypass Mode will completely disable the built-in Starlink Wifi router. this is an advanced feature that requires a Starlink Ethernet adapter and your own network equipment. A manual Factory reset will be required to reverse this." ... View more

Customers using Starlink can run into issues using Meraki SDWAN  if they use 192.168.1.0/24 The Starlink router uses 192.168.1.0/24 for the local LAN subnet. If your office uses 192.168.1.0/24  as well then this will cause issues for SDWAN and VPN Traffic    Prior to version 15.44  you could have the WAN subnet the same as a subnet on the  SDWAN   the route on the SDWAN took preference. after 15.44 the traffic would go out of the WAN port and get lost. This issue was fixed again in 18.0.2 but requires Meraki support to do a back-end fix. The best solution would be to change the WAN subnet to a different range but this has been impossible. I recently had a Starlink at my office and with the help of support, there is a solution now. Starlink allows you to bypass the modem but you must have the ethernet adaptor   ====================================================== To bypass the router, go to the App home page > Settings > Advanced Starlink App version must be at least 2.0.19 to work The toggle button on to bypass the Starlink router This allows you to completely disable the Starlink Wifi Router. You would need to utilize a Starlink ethernet adapter in order to plug in your own equipment. While Bypass mode is enabled, router commands will not work. If the toggle switch does not appear in the Settings tab, can factory reset the router and/or delete and re-download the app. App Message in red text when Bypass is enabled: "Bypass Mode will completely disable the built-in Starlink Wifi router. this is an advanced feature that requires a Starlink Ethernet adapter and your own network equipment. A manual Factory reset will be required to reverse this." ==========================================================   As an interesting aside..  MY voice MOS scores change changed from 4.4  to 4.2  when using Starkink  and Packet loss was about 1%  Starlink MOS score   ... View more

This not been my experience  and I have to roll back   I would love to change the spoke but Star-link  can only be configured to 192.168.1.0/24  and it cannot be changed. Elon if you are reading can you please allow users of star-link to change the LAN addressing and turn off the WiFi  it would allow much better playing with meraki.   In Australia we have a lot of remote farms on star-link using Meraki ... View more

Yes I have just seen this across many clients.  when I look up hash on virus total it says item not found.    Support must be getting smashed as they are not answering....   Update:  Got through to support and they are investigating but that this point they think a false positive.  They are going to update the banner in security center once they know   ... View more

Loved the Christmas Tree made from meraki gear ! ... View more

The issue was at Microsoft End.  Needed to open a support case and get them to trace the calls. ... View more

My understanding was the prices were adjusted so that when you bought both the price was still the same as it was originally.  So there should not be additional expense.  I haven’t bought one lately so I can’t verify that is true. Prices going up everywhere you may not notice ! ... View more

Thank you for the clarification.  White is much nicer color.   I have some under some air conditioners  and the green looks terrible against the white wall.     Another Question   when I am at a customer site  how can I tell if they have been replaced by looking at them,  if they are both white now ??  is there some other tell tale sign ??   ... View more

Can some one please conform that has just bought a new Leak Sensor cable that they received the MA-CBL-LEAK-1  and not the MA-CBL-LEAK-1A  ??    and was it White or Green ??? ... View more

Yes I was referring to external address. ... View more

Just and update the latest Firmware  17.8  has fixed the issue of the IPV6 just stopping after a while  when the IPV6 Prefixes would just disappear from the "IPv6 Prefixes" Tab  for Manually Assigned IPv6 Addresses.   Also the allow  incoming IPV6 ICMP firewall rule I had just started working.   I removed the Secondary MX  and all seems much more stable and the dash board now displays the status correctly (all the fields line up correctly on the Uplink Tab with secondary removed)  Think I will leave this disabled till the IPV6 external virtual ip address support is there.   Still have 1 unresolved issue and that is how do the clients behind the meraki on IPV6 get the DNS servers ?  Is the Mx advertising any IPV6 servers.   My switches have IPV6 address on AUTO  but are not getting IPV6 DNS.  is the ONLY way to get DNS to have STATIC IPv6 Address and STATIC IPv6 DNS servers ?? (latest firmware also fixed the bug that the IPV6 interface is on the correct VLAN and not VLAN 1.  Yay !)         When testing IPv6 some of the testing sites say IPV6 relies on some ICMP IPv6 messages. Any IPV6 Experts out there is this best practice ??? Should I be leaving a firewall rule to outside to allow ICMPv6 traffic any to xxxx:yyyy:zzzz:dd:: ?? ... View more

This is a great idea stops waste.  well done ... View more

I got this update from support  the  (MA-CBL-LEAK-1)  I received is one that has the issue fixed and the case closed automatically   This is very very confusing..  So all new cables that have the defect fixed have the same part number as the cables that have the defect.  The colour is exactly the same as the ones that have the defect.  When I look at them side by side I can not see any difference between them.  I admit the White cable looks so much better than the green one and looks very ugly under the white aircon unit it protects.  I prefer the white cable but would have liked to have seen something on the cable that indicates that this is the 1A cable even a green dot on the plug.    If Meraki know exactly all the customer that received the faulty leak cables why is this not listed in the  Help-> hardware replacements  menu for the people effected ?  I have sold Leak Detectors to other customers and have NO idea if they have faulty cables to.  I can not look at the existing cables and know by colour.   I cannot look in the dash board and know they were part of the recall.  Am I missing something here ??  What colour cables have others been getting as part of the recall  I would be interested to know. ... View more

the issue is that I am splitting the ISP supplied address range between inside and outside    for for a while then stops.  ... View more