Meraki

Adam · ‎Apr 24 2018

Well strange, at this point I'd try an after hours reboot of the MX if you haven't done that. Then I'd try to simulate some security traffic that should show up to diagnose further.

Adam · ‎Apr 23 2018

I'm good at silly questions @Dylan_YYC Have you checked your MX routing? At one of our sites we were routing all of our traffic via 0.0.0.0 to a private MPLS connection on one of the LAN ports instead of going out the WAN port and this caused there to be nothing in security center since it wasn't traversing the WAN interface. Other than that, it should be working.

Adam · ‎Apr 23 2018

Silly question but you verified that Security Appliance>Threat Protections are enabled right? If both disabled it'll show up blank.

Adam · ‎Apr 23 2018

Just disabled the 'Try Beta', I'll wait a few and see if it shows up. Thanks @MRCUR

Adam · ‎Apr 21 2018

Hrm I'm not seeing an option for 3.6 in my networks? Only 3.4 still.

Adam · ‎Apr 21 2018

@MRCUR wrote: MV 3.6 firmware is available with additional MV12 fixes. I'll give it a look, please post here if anyone tests or notices a fix for the issue outlined in this thread.

Adam · ‎Apr 20 2018

@PhilipDAth wrote: So you are saying Cisco Meraki launched a DOS attack against you - or simply disabled your devices for non-payment? I read it the same way as well. It seemed like he was saying that Cisco was launching a Denial of Service (DOS) attack against his networks. But I'm hopeful to assume that he just means his services were being denied. Or just a fancy way of saying his services were disabled. I strongly doubt Cisco would launch a DOS attack on a customer unless they were ready to cut a large check after being sued.

Adam · ‎Apr 20 2018

They give a grace period don't they? Or did that expire too?

Adam · ‎Apr 20 2018

@PhilipDAth wrote: Never tried it myself (stopping using Visio in preference to www.lucidchart.com a long time ago - Visio is such a rip off), but on the topology page their is a download button on the top right which can download an SVG file. You should be able to import this as a background graphic in Visio. And agreed with @PhilipDAth I just make my drawings in Google Drawings

Adam · ‎Apr 20 2018

Network Wide>Topology then click the 'Download' button in the top right.

Adam · ‎Apr 20 2018

I feel like I may have noticed this when reviewing a port the other day as well.

Adam · ‎Apr 20 2018

@Owen wrote: Transparent MX between edgerouter and internal switch as a content filter. You can't do VLAN's though when in transparent between the router and switch. Interesting idea. I wouldn't need the VLANs since I could do those on the core switch. Have you tried something like this? Does it circumvent the bandwidth restriction of the MX? Would it still allow me to use the MX for IDS/IPS and Content Filtering? What are your thoughts as well @PhilipDAth

Adam · ‎Apr 18 2018

rofl @PhilipDAth size 2 font.

Adam · ‎Apr 18 2018

Praise given 😉

Adam · ‎Apr 18 2018

@CarolineS wrote: @NSGuru wrote: Is there a way to had unanswered topics shown on the main page of the community when logged in? Ooh, I think I can do that, let me investigate! Me and @CarolineS discussed something like that on the phone as well #reminder. Maybe on the right above 'Top Kudoed Posts'

Adam · ‎Apr 18 2018

Same for us. Disabling audio has resolved the choppiness and export issues but I installed my 3 cameras and replaced some nest cameras specifically for audio. So I hope to hear more from support soon.

Adam · ‎Apr 18 2018

I've periodically had this issue. Usually a reboot of the AP resolves it. I'm hoping the Wireless Health analyzer helps identify these issues in the future without it having to be reported from a user first.

Adam · ‎Apr 18 2018

Would be nice if there were a way to use the EdgeRouter-X to get the benefits of internet speed but still use the MX64 for everything else. I can't think of a way to do this though without losing the IDS/IPS from the MX.

Adam · ‎Apr 16 2018

Congrats to all our new members. Keep participating, it's a great community.

Adam · ‎Apr 16 2018

@RyanPinheiro I've been told you can turn the audio off on them for now to avoid the issue until they have a fix. Assuming the audio isn't critical to your operation. I'm testing it.

Adam · ‎Apr 16 2018

This mostly spells it out. https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Recommended_Configuration_for_Trunk_Link_to_Non-Meraki_Switches Just make sure the physical interface you are configuring at the trunk is the actual interface connected to your switch trunk and not a sub interface.

Adam · ‎Apr 16 2018

I'm not seeing duplicates in G Suite.

Adam · ‎Apr 16 2018

In my case I noticed it via LAN/Local streaming. I was also having issues with the export that gave me indication that it was not an internet connection problem. Support confirmed the intermittent issue on MV12's with audio enabled. @MRCUR

Adam · ‎Apr 13 2018

I had the wrong app installed as well initially. The one you guys installed was the one referenced in the directions but it is older.

Adam · ‎Apr 13 2018

You guys are correct, the vendor support was non existent. I found a solution from a different bluetooth device in an obscure forum. First make sure you download the right app. You'll want the 'Divoom Smart' app. Icon looks like this in the app store. Then with your bluetooth already on and connected to the speaker go ahead and open the app. You can click skip when the app brings you to a login screen. When you are on the device list page swipe up on your phone and turn off bluetooth. Give it a couple of seconds then swipe up and turn it back on. Do all this while the app is still open on that device list screen. You may have to do it once or twice before the app recognizes the bluetooth devices and connects. After that I've had had a problem with it detecting in the app.

About Adam

Adam

Community Record

Badges