is your drawing wrong? you say dropping untagged at mx but you draw it at ms if you drop untagged traffic at mx you are dropping the stp packets. so they will not be send back to the switch
... View more
warm spare would be layer 3. what you can do is stack them. and if you like, run lacp to other switches. otherwise it use stp and block one port
... View more
it says nothing is connected or does the port give you a message? any logging on both devices related to this event that you can share with us? is it a trunk port or a access port?
... View more
can the attribute name be wrong? wireless https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/RADIUS_Override wired https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Dynamic_VLAN_assignment_via_802.1X_(RADIUS)_for_MS_Switches if you dont use vlan overide you dont need this
... View more
for a branch i think its fine. for a DC you probably want to tune routing, timers etc for compatibility, and you dont want updates and reboots often.
... View more
you can add all private ranges in the last rule. localnet:192.168.0.0/16, localnet:10..... or maybe just 1 rule localnet:0.0.0.0/0 (not sure about this one)
... View more
that it needs cloud connectivity. you manage all devices in one cloud portal. and that it analyses traffic not only the ip but also give you info what applications run in your network.
... View more
take a look at Reserved IP ranges or Fixed IP assignments at "Security Appliance/Teleworker Gateway > Configure > DHCP page" https://documentation.meraki.com/MX/DHCP/DHCP_Services
... View more
yes. on the lan side with warm spare you can configure/use 1 IP only. and do not connect both mx directly . let vrrp make use of your lan switches
... View more
that are the most commonly used local network /private ranges(see https://tools.ietf.org/html/rfc5735 ) .No you dont need to add that subnet it is part of 192.168.0.0/16
... View more
you can sync ssid settings but not in combined networks https://documentation.meraki.com/zGeneral_Administration/Organizations_and_Networks/Cloning_Networks_and_Organizations_in_Dashboard
... View more
meraki does not have real L3 links they are L2 going to a SVI. you get mx1 mx2 and core switch all in vlan1 so vrrp can function in that vlan1 using direct link between the mx's is not recommended. https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair
... View more
this pages give some guidance https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Link_Aggregation_and_Load_Balancing https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Switch_Ports#SwitchPorts-LinkAggregation
... View more
